Tech/maintenance Super glued pads - a cry for help

There exist electric reciprocating tools for wood carving, and with a little creative tool grinding I'm sure you could have a good miniature chipping tool; but they're wicked expensive. If you are also a woodcarver looking to improve efficiency it might be worth considering.. Maybe you could borrow one.
 
Thanks for pointing out the hazards. I have a box of N95’s on my bench. Always masked until assembling.

It’s my understanding the unit has retained the original finish. Cosmetic condition excellent. How would you go about blasting with any medium ?
N95s are good for particles but not vapors.

I’ve seen some small blasters that feed the medium through a hand-held pencil-like tool, and direct the medium to a small target. It’s not just a general blast-all device.

Edit: How did I forget lasers?
 
Also keep in mind that butane is heavier than air
Like ether...

That heavy and explosive vapour used as a reliable anaesthetic until the late 1980's...

A static spark could ignite ether vapour so theatre equipment such as anaesthetic machines and even plain steel theatre trolleys ran on conductive (black and yellow) wheels that earthed any charge
 
Last edited:
MAKE IT STOP!

Must I turn off notifications?
Yes, that or "unwatching"§ the thread will freeze the notifications.

geddit? Freeze! 🥶
Oh suit yourself

§
In the top panel of the thread is a Watch/Unwatch button. Probably it's set to 'watch' by default for threads you start; and you get a notification for each reply.
Which can get a little irritating
 
Not really. If you had a tiny little needle scaler you could chip that stuff out without having to do it manually. I wonder if a vibratory engraver with the tip of the bit ground flat would work.
Thanks for that idea - I have one of these, and there are lots of them cheap on ebay. I wonder if I'll remember this conversation if and when I need it for this purpose! https://www.ebay.co.uk/itm/900072831631
 
Dremel make reciprocating engraver available from your favourite internet store. About £25.00

1794741260758.webp
 
SG on razor blade before and after using the pointy Dremel, on the lower glue area with the lightest setting.
A chisel shape would be best, especially while listening to Bernstein's "ode to the air hammer." That tune got cut from West Side Story, but was revived for West Side Highway. 🎶🏴‍☠️🎶

IMG_7774.webp

IMG_7775.webp
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,056
Messages
578,165
Members
8,127
Latest member
PJ2116
Back
Top Bottom