Accessories Strap question

About 8 years ago, I bought two relatively inexpensive neck straps under a "generic name" from Musician's Friend. When they arrived, I tried them on my Bari. To my surprise, they were improperly manufactured. Sliding the adjustment for changing the length did nothing. The manufacturer had improperly configured the way the adjuster was threaded.

Bari Sax Neckstrap Extended Non-Extended.webp

Two of several straps I ordered. The sewn loop straps are improperly configured, moving the slider does not adjust length.

Bad Strap Good Strap.webp

Bad strap (top) versus one of my good ones (bottom). Loop is improperly configured on the top one.

I contacted them, sent photos documenting the problem, was connected with a supervisor in their warehouse. He went to the area in their warehouse, found that the sample of straps he opened had the exact same problem. They made up for it by offering me free brand name straps to make up for the defective ones, told me to keep the bad ones.

Not feeling right about shooting for their best straps, I selected ones of good quality on the lower end (still good straps, Rico that was close to but a touch higher in price.) Several days later, the replacements arrived. Shortly after, they withdrew the listing from their on-line catalogue.

Now I keep an extra strap in my cases, because I have at times pulled a horn out, put it on a stand. Then put it back in the case but forget the strap. Also it has saved a fellow saxophonist band member who showed up at a rehearsal or gig without a neck strap. I loan him/her my spare.

It also goes to show that if one does an adequate job up front to document there is definitely a problem and works patiently through their customer service, can get issues resolved in a satisfactory manner. I have also done this with merchandise that has been damaged in shipment.

In another case, a new instrument amplifier was damaged in shipment. It's cloth covered particle board case (nowadays called "high quality wood" :rolleyes: ) was split at the top seams. Several of the plastic protective corners were also shattered. On-line elsewhere I found powder coated steel case corners as a suitable replacement for the shattered plastic ones.

I was able to re-negotiate its price receiving an equitable discount. (They did not need to pay shipping for return, no added repair costs.) I carefully removed the covers, reglued the seams with carpenters glue and reinforced from the inside, installed additional anchor reinforcement screws with decorative washers from the outside, cleaned up for acceptable stage use.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,571
Members
8,133
Latest member
walthang
Back
Top Bottom