Stephen Howard
Well-Known Member
That's what tends to happen when a sax body gets bent. The metal stretches as it bends, so when you straighten the body tube the pillars might not realign themselves. This usually means breaking out the 'pillar realignment tool' - AKA a small mallet. This is why it's generally the best practice to straighten a bent horn body with the keywork in place.Saxophone back from Mr Carrington - £52 - he wasn't able to straighten as sax it was probably made that way and it would cause the pillars to be out of alignment.
In some cases you may have to desolder a pillar and move it slightly (and it's usually the lowest pillar on the upper stack).
If you don't do this you'll have to set the pads so that they accommodate the curve in the stack rod. It'll work fine - for a while - but as the action wears it will try to straighten up...and that's when the fun starts.
