Accessories Soprano accessories - shopping list

Saxophone back from Mr Carrington - £52 - he wasn't able to straighten as sax it was probably made that way and it would cause the pillars to be out of alignment.
That's what tends to happen when a sax body gets bent. The metal stretches as it bends, so when you straighten the body tube the pillars might not realign themselves. This usually means breaking out the 'pillar realignment tool' - AKA a small mallet. This is why it's generally the best practice to straighten a bent horn body with the keywork in place.
In some cases you may have to desolder a pillar and move it slightly (and it's usually the lowest pillar on the upper stack).
If you don't do this you'll have to set the pads so that they accommodate the curve in the stack rod. It'll work fine - for a while - but as the action wears it will try to straighten up...and that's when the fun starts.
 
Paul did say it probably wouldn't last forever, he did do some work on a one or two pillars. I doubt it'd be worth too much effort on this horn before it became non viable from a financial point of view. It's a case of having a cheap soprano that's playable so I can see if it's just GAS or something I want to pursue more seriously: In which case I'll be upgrading to something of higher quality.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,592
Members
8,133
Latest member
walthang
Back
Top Bottom