Tech/maintenance Replacement crook/neck problems

I'd caution against this. The pull through
could have synthetic materials in it that might melt making the problem a whole lot worse.

The best thing you can do is take everything to a tech as others have advised. Where are you located?
That is why I said warm not heat, if you can hold it then synthetics shouldn't be melting.
Maybe use warm water instead of the dryer and don't get the cork wet.
 
Dishwasher soap and water is sometimes used for lubrication in pipes. I would probably take the screw rod out of the octive hingeand remove it before lifting the halo arm off. Then try with a small mouthpiece bottle brush. It's mostly caught on the octave pip.
Let us know how this goes?
 
Take both necks (and your horn) to a tech. Some people should not try to do their own work.
For sure. I wouldn't have ordered the new one if I'd known it'd need any adjustments.

I'd caution against this. The pull through
could have synthetic materials in it that might melt making the problem a whole lot worse.

The best thing you can do is take everything to a tech as others have advised. Where are you located?
I'm in the East Midlands. I think there is a tech not too far away I know of. Boy do I wish I'd just gone there first now.
 
For sure. I wouldn't have ordered the new one if I'd known it'd need any adjustments.
I can't imagine there are many replacement necks that will just fit with no adjustments. It's normal to do a bit of bending so that the octave key closes fully with the minimum of play at the linkage. You need just the teeniest bit of free play:

There needs to be distance between body octave lever and halo
I hadn't heard the word halo before in this context.
 
For sure. I wouldn't have ordered the new one if I'd known it'd need any adjustments.


I'm in the East Midlands. I think there is a tech not too far away I know of. Boy do I wish I'd just gone there first now.

Paul Carrington's your man. He's in Flintham (near Newark on Trent). He's a really nice guy and might do it while you wait: his phone number is on Google so hopefully ok to post on here:

01636 525397
 
“Maybe”, “probably”…. gotta love all the wannabe armchair techs that likely wouldn’t try their methods on their own horns.

Take it to the tech and ask to watch how they adjust the octave key. It’s worth learning because it is likely that you may have to adjust it again.
 
“Maybe”, “probably”…. gotta love all the wannabe armchair techs that likely wouldn’t try their methods on their own horns.

Take it to the tech and ask to watch how they adjust the octave key. It’s worth learning because it is likely that you may have to adjust it again.
'Maybe - probably', English diffidence.
 
I managed to fix it! :banana:I'm not sure why I wasn't able to do it before, must not have had the right bending technique. It was simple once I figured out how. Thanks so much guys for your help :thanks3: I'm going to have a go tonight to make sure it plays ok as I only did a quick test, but the lower octave is now working so fingers crossed it's sorted now.

I can't imagine there are many replacement necks that will just fit with no adjustments. It's normal to do a bit of bending so that the octave key closes fully with the minimum of play at the linkage. You need just the teeniest bit of free play:


I hadn't heard the word halo before in this context.
Good to know this is normal. I thought I'd broke another one without even playing it yet! At least I've learnt some more about the mechanics of the sax through this.

Paul Carrington's your man. He's in Flintham (near Newark on Trent). He's a really nice guy and might do it while you wait: his phone number is on Google so hopefully ok to post on here:

01636 525397
Thanks for the reminder-I think someone gave me his details before but I'd have had to go through my posts to find them. Hopefully I don't need a tech now but always good to know of a reputable one. If I get anything else wrong with the sax in the future I can always take the old neck along-if I'm still not able to get the cloth out by then!
 
I hadn't heard the word halo before in this context.
I actually picked up the term from @JayeNM. Although the conversation was regarding this style below.
1716961078329.webp


Halo seemed fitting to describe the ring on end of octave key arm. Teardrop loop or halo is term I use for the OP’s style.
I dislike the word “ thingy”
 
I actually picked up the term from @JayeNM. Although the conversation was regarding this style below. View attachment 26217

Halo seemed fitting to describe the ring on end of octave key arm. Teardrop loop or halo is term I use for the OP’s style.
I dislike the word “ thingy”
Off-topic, but this is image is intriguing.
What's with that string? Is there no spring? Is that why the neck is balancing?
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,069
Messages
578,503
Members
8,131
Latest member
Jef B
Back
Top Bottom