Tech/maintenance (Re) Painting my sax?

Ok i get your points.
What would you suggest using to give it a decent patina in as little time as possible?

Quantify “decent” and “as little time as possible”.

FYI, I got to this situation because the original black lacquer job Selmer did was so bad that it started flaking and spotting after just a couple of years ownership, even with regular wipedowns. Especially on the body tube and the neck. I made it worse by trying to paint over the flaked bits.
Then when taking the lacquer off i found that it was very unevenly applied to the sax. Very thick in places and very thin in others. It was just a very bad paint job. That put me off buying another Selmer new or new-ish.

Selmer’s black lacquer is several coats thick to make it sufficiently opaque. Their tinted or clear finishes are thinner. Some of their finishes are quite good, others (ex. Ref 54 tenors with faux aging) start ugly and only get worse - they don’t age gracefully

Soundwise, i find it much better now, so in my opinion, the lacquer did affect how it sounded.
I could leave it as it is, unlacquered, it looks pretty enough to me and I’m sounding pretty good atm.

Yeah, just play it and watch it’s patina develop. Some people are fine with an “organic” finish and just let it go. Others prefer to wipe the bare brass down after each use to minimize the spotting from “spit”. Avoid salt spray if you don’t like the green/red corrosion effects.
 
I'm with @ghostler. Give it a coat of Renaissance Wax and let it be. It will need to be re-applied occasionally, especially at the touch points, but around the body it will last a long time. I have a delacquered Ari 1 alto that I did a forced patina with selenium and finished with a coat of Renaissance Wax. That was four years ago and it still looks great.
 
View attachment 29475
99% de lacquered now with Acetone, one toothbrush for the large areas and a smaller one for the difficult to get to places. I like the look. I even Carnauba waxed it with regrettable outcomes, the whole sax was covered in verdigris the next day. Wiped that off and now I’m doing the last bits and then going to let it dry. It’s got these weird marks where I used a brush to remove the lacquer but I kinda like it.
Next step will probably be disassembly, unless I see a nice patina developing on the surface in which case I might just leave it like that.
I’ll only have the alto and the sop to play then so I’m not looking forward to that cause I’m pretty bad (more like extremely bad) on those.
Tested different paints and the auto paint looks the more promising visually but I’m slightly worried about its effects on the sound. We’ll see. Can always do another Acetone/Thinner job. 😰.
It doesn’t look bad at all considering you stripped the thing fully assembled. The odd rainbow / iridescent look is likely from petroleum content or additive in the wax. Could also be residual film from paint /acetone. My best suggestion. Send it out to a quality spanner man for a good clean-oil-adjust and leave it alone.
 
I'm with @ghostler. Give it a coat of Renaissance Wax and let it be. It will need to be re-applied occasionally, especially at the touch points, but around the body it will last a long time. I have a delacquered Ari 1 alto that I did a forced patina with selenium and finished with a coat of Renaissance Wax. That was four years ago and it still looks great.
Might you have any images of the horn? It'd be great to contrast the fresh patina with today. Failing that, I'd like to see the equilibrium patina of a selenium/Ren' Wax finish after 4 years.

Thanks.
 
Might you have any images of the horn? It'd be great to contrast the fresh patina with today. Failing that, I'd like to see the equilibrium patina of a selenium/Ren' Wax finish after 4 years.

Thanks.
Here's what it looks like now.
1000011859.webp
 
It sort of has that brushed antique brass look of some modern saxes, I like it.

But when I first saw it, I had not had my first cup of coffee yet. Was trying to figure out how @MarkSax 's budget Chinese sax suddenly turned into a Buescher.

If that is all it took to change my Chinese sax into that ... 😉

Have another coffee. MarkSax's tenor is a Selmer!
 
Natural patina is too fragile for it to be left on its own. Apparently.

See my SBA in the forked thread. It is not fragile.

@MarkSax - Just leave it alone. If the horn plays well, who cares what it looks like? I get having pride in your instrument; keep it clean, keep it in good condition, keep playing it. But in this day and age having a horn look nice and shiny is no longer a requirement. (I’m not saying this is a good thing, just that’s what it is.)
 
Natural patina is too fragile for it to be left on its own. Apparently.
It's not that it's too fragile. It's that it's too unpredictable and takes so stinkin' long.

You wait 2 years for it to develop and it ends up looking like boo. (Excuse my potty mouth.)

OP's horn looks really good as it is. Personally, I'd want to keep it that way until it's due for a repad and then I'd prefer a forced patina to a relac or paint.
 
But in this day and age having a horn look nice and shiny is no longer a requirement.
About 20 years ago, I was in a store TV section, where they had various demonstrator models plugged in with various pre-recorded videos running to demonstrate their potential. These were the older flat screen TV's costing thousands of US dollars.

One had a tenor saxist playing a very nice solo jazz line on an outdoor stage. His sax was old, lacked much of its original lacquer finish with patina in places, and interestingly had visible dents, but he sounded really good. (Sound was plugged into a high end home theatrical sound system.)

Putting 2 and 2 together: I think where one may see a shiny new sax playing is if the camera zooms very close into the bell engraving to reveal the model / make, then pans out to view the saxist; it is not just a performance but doubles as a "prepaid advert" by that manufacturer or a major regional distributor of that sax.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,058
Messages
578,322
Members
8,127
Latest member
PJ2116
Back
Top Bottom