Accessories Pro Tec case zip

dooce

Senior Member
Messages
1,592
Location
Daventry
Has anyone had an issue with the zip on a Pro Tec case? Probably down to my mis-use over the 12 years I've owned it but the zip on my tenor keeps jamming (in the non-musical sense), and its starting to come apart at the very bottom of the case. I have actually had to borrow a tenor from another player because I couldn't get the mine out of the case at a gig! Embarrassing.....

Can the zip be replaced?
 
I've got Trevor James cases which are the Pro Tec with TJ logos on. They're not the best quality zips.

A soft pencil - 4B or softer is a good shout. You could also try spraying some silicone lubricant on to a cloth and rubbing it in the zips. You can buy this at Halfords or Screwfix, very handy to have around the house for all sorts of things.

Failing that if the zip is too far gone, you might be able to find and independent shoe repairers (not Timpsons) or a shop that does clothing alterations that could replace a zip for you
 
The zip runs fine, its just the very bottom end that's falling apart - probably because at some time I've opened the case when the zip has not been fully undone, so the teeth have been pulled away from the fabric. Bit of a specialist job to find the right zip and replace it I guess.....
 
Zips aren't that specialist. Many are assembled from a roll and cut to size. It's the skill of the sewing required to provide a decent repair. It appears that the outer fabric of the case is held in place by screws in to the wooden shell.

I'm not about to take one of my cases apart to find out, but it does look like you could remove the outer covering fairly easily and in one piece to replace the zip.
 
I'm interested to see the fix, if you find one. When my protec zipper went, I just got another case. I didn't have the tools or skills for sewing thick fabric like that and figured having an upholsterer fix it would cost as much as another (used) case. I was a shame that one small failure like that made the case unusable. I suppose I could have put some latches on it, now that I think about it. Oh well. Good luck.
 
Has anyone thought of contacting Protec directly and asking the question :confused2: maybe you can purchase the zipper directly from them. For installation try luggage repair, yardage store or sewing machine sales / repair. One of these places will know where to get a zipper installed.
 
Last edited:
I just looked at a case that I bought a while back. I took some pictures when I was first checking fit. Lookie what I see ! They use YKK zippers!
Now you just to find a supplier or who they sell to local.
3F04A712-E7BC-45B0-A7F7-495DC2034C38.webp
 
I put latches from the local hardware store on my bass clarinet case when the zipper gave up the ghost I put on three. The lot cost about Β£5 from the local hardware store and we’re easy to screw on. They were doing well when I have it to a friend.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,076
Messages
578,679
Members
8,134
Latest member
banjo
Back
Top Bottom