The question is, do you know her? And did you buy her a drink?Only one woman in the audience could hear the difference when I switched.
The question is, do you know her? And did you buy her a drink?Only one woman in the audience could hear the difference when I switched.
Statistics never learned me how to say to a woman that she is not the only one.That's good. Statistics show it's normally 1.5
Excellent questions!The question is, do you know her? And did you buy her a drink?
There are caveats to raising key heights, it affects tuning. 12 years ago, I bought a well battered early 1950's Beaugnier Vito Low Bb bari sax, an ex-high school instrument. It played very badly out of tune because the key heights were way off, too high.
Over time after I straightened the bent key racks, removed dents, adjusted key heights. Now it plays very well in tune, it is a sax that is very easy to play in the altissimo register. There is a reason why the factory set those key heights ....
For one, I am not a seasoned repair tech, just an obsessive compulsive who is meticulous in getting things just right on my own horns. I don't mess with another's horn, except in one case I repaired an in-law's clarinet with a couple of lower bad pads including one pad that came apart, restoring it to playability.It was my friend, a fine player, who told me that his tech opened up the keys to make his sax sing better. Lots of saxes are opened up because using too thick pads. I have Martin saxes and the need thin pads 3,8 - 4.0 mm and what to do when the pads are too thick?
Pad height is often neglected. Try to find out when the 4.0 and 4.2 mm pads became standard.It was my friend, a fine player, who told me that his tech opened up the keys to make his sax sing better. Lots of saxes are opened up because using too thick pads. I have Martin saxes and the need thin pads 3,8 - 4.0 mm and what to do when the pads are too thick?
Same for me. I just work on my own saxes.For one, I am not a seasoned repair tech, just an obsessive compulsive who is meticulous in getting things just right on my own horns. I don't mess with another's horn, except in one case I repaired an in-law's clarinet with a couple of lower bad pads including one pad that came apart, restoring it to playability.
Yes. Sometimes I hear sax players complaining after an "overhaul" ( not complete mechanical overhaul). The overhaul was just new pads, eventually new corks and felts and a set-up. A young Yani owner had new pads (.185" some pads even thicker) with new pads. Needless to write, but his fine sax didn't play well.I think I now see what you are referring to. Appears that in overhauling, the repair tech who replaced pads with thicker ones did not restore pad opening heights making the sax sound stuffier, probably affected intonation as well.
I think that this is where having resonators on the key pads comes in useful. My Beaugnier Vito, last tech that replaced the pads used non-resonator pads, which may account for its slightly darker sound. It has not stopped me from playing it, and most people don't notice. However, it now needs pads replaced. When I have it overhauled, I will go with resonators.To open up a sax, raising the keys, often result in lost key action. Play fast or have a sax that sings better?
Great ears deserve a ring of gold on her finger.The question is, do you know her? And did you buy her a drink?
I have flat oversized reflectors/resonators on my Martin Committee saxes. I think the oversized reflectors/resonators gives me and my saxes a bigger sound. A more contemporary sound. Martin Committee saxes have low key heights which can sound a little bit closed and resonators/reflectors are helping up.I think that this is where having resonators on the key pads comes in useful. My Beaugnier Vito, last tech that replaced the pads used non-resonator pads, which may account for its slightly darker sound. It has not stopped me from playing it, and most people don't notice. However, it now needs pads replaced. When I have it overhauled, I will go with resonators.
Looks like the conductor wanted the woodwinds to play very soft.Pictures of rubber stoppers on C clarinet from Paris, last half of 1800s.
Pads and needle springs looked more recent, but the current height of the stoppers are a wee bit too tall and not right. (enlarge pics)
I know this is already old hat to most.Looks like the conductor wanted the woodwinds to play very soft.
It's hard enough to get two of them playing a good unison, let alone half a dozen.why there is only two of them versus the much greater number of strings,
Luckily for the woodwinds strings in classic orchestra play much louder than 50 years ago.I know this is already old hat to most.
In the community band, I find it very easy for my tenor sax to overpower the upper woodwinds during passages. In an orchestra, I gather that it is easy for the even a clarinet to overpower the strings, why there is only two of them versus the much greater number of strings, even why brasswinds are limited in number.
It is easy to play loud. It is a challenge to play well and at pianissimo.
Imagine a 76 sops orchestra.A
It's hard enough to get two of them playing a good unison, let alone half a dozen.
To open up a sax, raising the keys, often result in lost key action. Play fast or have a sax that sings better?
You are probably right. It was my friend who told me that he took his YTS 61 to the tech and had the keys opened up. And it sang good after that. He sounded great ..... .Lost (or double) action shouldn't be a problem - you just dial it out. In extreme cases it might involve some judicious tweaking of the arc of the Bis Bb lower arm in order to get the best balance between the upper and lower stacks.
