Accessories NUX B-6 Saxophone Wireless System

I think the price is very good compared to other wireless systems, and lets face it many players will have multiple mouthpieces costing way more than this mic, even many ligs are priced more than this.
Regarding mouthpieces, I am unfamiliar overall with other players and can only speak for myself.

Most of the mouthpieces I have were bought with a budget in mind. For my saxes, the most expensive one I have is a Selmer S90-190, but it came with a used Antigua Winds Alto pro model I bought for about twice the cost of the mouthpiece.

Rest of the mouthpieces I purchased are a half dozen Rico Royal Graftonites for my SATB's, which cost me under $25 US each. Recently for community band I bought a Bari ESKTSP Esprit Tenor Saxophone Mouthpiece Kit which came with a 2 screw metal ligature for under $20 US.

I don't fault those who invest in more expensive mouthpieces. Being a pensioner over the past 12 years, I've managed to have the most fun on a budget.
A Shure sm57 mic will cost you around a £100, then you have to buy a stand and cable, I have just paid £150 for Nu-x b6, a bargain I think.
For those who need such a system, the NUX B6 appears to have good value.

I've learned over time in maintaining a church sound system, expensive mikes drop and break as easily as inexpensive ones. Our wireless handhelds seem to last at most 2 years due to breakage, so I've donated and replaced these with 2 mike systems under $100 US, on clearance less than that. Started 10 years ago, and we are now on the 4th wireless mike system.

On yanex, I am getting all kinds of obscure links to Eastern European vendors but if I just google NU-X B6, Amazon, Sweetwater, GuitarCenter show as the top sellers.
For Sweetwater, I received the following message:
2024-12-03 Sweetwater ningún NUX.webp


Thank you, I stand corrected on Musician's Friend:

Simmons Titan 70 Electronic Drum Kit With Mesh Pads & Bluetooth

This time I simply used the "nux" search string, which brought up 263 items. Then used their category,

NUX Pro Audio​

which narrowed it to 14 items.
 

Correction:​

I got this odd result from Musicians Friend:

2024-12-03 MF enlace incorrecto.webp

Yet after composing my message using no additional descriptive text in the link, I got Simmons Titan 70 Electronic Drum Kit With Mesh Pads & Bluetooth in my post above. But clicking on it brings up the NUX mike system. Link is:

Code:
https://www.musiciansfriend.com/pro-audio/nux-b-6-24ghz-wireless-saxophone-microphone-system/l95755000000001

Let me add the correct text to the link:
Musicians Friend: NUX B-6 2.4GHz Wireless Saxophone Microphone System Black

So much for today's A.I. :rolleyes:
 
I don't disagree with you, @jazzdoh , the NUX is a worthy system and your points hold validity.

Several years ago I was looking for such a system, especially for doing recordings, but here in the US, the sax mike systems then were easily double its cost. Since, being older things have changed for me.
 
I went through 2 Shure BLX 14 systems which were way more expensive and still needed a power outlet for the receiver not to mention the tether to the body pack. In one occasion I put the horn on the stand and walked away, luckily the wire broke instead of the horn falling off the stand but the latter also happened (luckily in that case I was just turning and the horn hit my upper leg - no damage. But one close call is one too many! I am still using the system for a jerry rigged classical guitar with a lapel mic fixed installed inside the body for some live sessions. It was a great option at the time, Shure customer service was outstanding and I have several mics still.
 
Thanks for all your comments, I'm looking for to using it in the new year, @sax panther that's worth knowing to use it with a lead, I had heard to keep it away from routers, so do you charge the box up separately and then charge the mic and the receiver out of the box?
If in charging at home before a gig then I tend to leave the mic and receiver in the case and charge the case by plugging into a usb socket (which charges everything in the case too). That way I've always got enough juice to charge just using the button on the case if I've got a double gig day and need to give it a little top up travelling between gigs.
 
Thanks folks. I've just bought an NUX B6 after another sax player trialled his out last night and after reading hear above.

I like the wire-free system ideal. I have used all conceivable mic systems over my 45 years including Barcus Berry bugs, Lapel Mics, shure, AKG, and Superlux with a Lekato XLR/USB dongle set. But doing away with any leads is the best way for saxes ... yup, I've had all the dramas of saxes being pulled over and yes, as a busy player, all the wired systems eventually take a battering.

The only thing that worried me was interference from two systems and signal combing BUT, NUX say that the B6 sets it's own digital ID/address so that up to 6 systems can be used side by side without interference although, it does recommend keeping a couple of metres from wireless PA routers.

Good to hear that others have had no wireless PA problems. Oh, and his sax EQ sounded great. I paid £166 from Thomann post free ... and 7 hours battery power!
 
Last edited:
I got my NUX B6 about a year ago from Sax.co.uk and am very pleased with it so far. Apart from being small and easy to use, I've now started to get the confidence to wander into the audience at jam sessions, open mics and when playing with bands. I love the fact that I can carry it in the protective case, while the same case is also charging up the receiver and transmitter to be fully gig- ready.
 
Thanks folks. I've just bought an NUX B6 after another sax player trialled his out last night and after reading hear above.

I like the wire-free system ideal. I have used all conceivable mic systems over my 45 years including Barcus Berry bugs, Lapel Mics, shure, AKG, and Superlux with a Lekato XLR/USB dongle set. But doing away with any leads is the best way for saxes ... yup, I've had all the dramas of saxes being pulled over and yes, as a busy player, all the wired systems eventually take a battering.

The only thing that worried me was interference from two systems and signal combing BUT, NUX say that the B6 sets it's own digital ID/address so that up to 6 systems can be used side by side without interference although, it does recommend keeping a couple of metres from wireless PA routers.

Good to hear that others have had no wireless PA problems. Oh, and his sax EQ sounded great. I paid £166 from Thomann post free ... and 7 hours battery power!
Read my post @ #11
 
How do you all get on with using a sax stand with this setup?, with the Samson I just moved it towards keys side of the bell, I presume this possible with the B6.
Yep, just clip the nux somewhere on the bell where lt doesn't interfere with the cradle of whatever sax stand you're using (I use on of the Hercules ones that folds up inside your bell).

If you do need to move the mic to a different spot on your bell (or remove it completely) , it's just a case of squeezing it at the side and the gripper releases - no screws or clamps involved.
 
How do you all get on with using a sax stand with this setup?, with the Samson I just moved it towards keys side of the bell, I presume this possible with the B6.
Yes, it's no problem at all. The only application that is a bit awkward is on soprano where you want to mount it backwards so that the transmitter "hangs" into the bell and the mic extends over the tone holes for best quality sound. Otherwise it'll sound overly bright and harsh/scratchy
 
Yes, it's no problem at all. The only application that is a bit awkward is on soprano where you want to mount it backwards so that the transmitter "hangs" into the bell and the mic extends over the tone holes for best quality sound. Otherwise it'll sound overly bright and harsh/scratchy
Ah yes good point - we replied at the same time but my response was based on my use of it on tenor and alto. Hardly anybody books me for soprano gigs, with good reason.
 
On the matter of the bell mount and stands etc., the NUX B6 also gets in the way of the Jazzlab style deflectors, requiring the mic to be moved to the side of the bell but, that seemed to be no problem for my buddy last night and, he uses a Hercules stand for his tenor. ... all we need now is one of these mics with three echo/delay settings and whey hey that's everything covered!
:cheers:
 
Last edited:
I use a jazz lab deflector as well as the mic, without interference with the stand. I basically marked up the optimum positions for the deflector and the mic with Tippex (shock -horror) on the bell lip so I didn't have to think where to clip them on once I was ready to start playing. (You could use bits of masking tape as an alternative marking method)
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,063
Messages
578,429
Members
8,129
Latest member
Bartman
Back
Top Bottom