Stephen Howard
Well-Known Member
Try a 6 x 32 UNC 😉TJ use M4 x 0.8 which is even harder to get any taps/ dies for.
Try a 6 x 32 UNC 😉TJ use M4 x 0.8 which is even harder to get any taps/ dies for.
I doubt it. I think it probably boils down to whatever threads the designer prefers. For example, if I'm making up a new tool that features a threaded section I'll usually go for metric - but if the threads are small I tend to prefer BA.Perhaps they do this to give a clue it’s not a Chinese fake , a simple thing but effective to give the buyer a clue , I have a yani fake and the neck screw was a standard 4mm
I'd drill it out and heli-coil it to M4 x 0.7. Problem permanently solved!Try a 6 x 32 UNC 😉
Unfortunately it appears that the sax manufacturers of the world didn't get that memo.The use of "bastard threads" - for example, mixed English and metric, or these oddball "standards" that are only found in the back pages of the standards documents, is frowned upon. No employer I've worked for would ever give the sign-off to a simple clamp thumbscrew in either M4 x 0.75 or M4 x 0.8 when the perfectly functional M4 x 0.7 is available, for which the full range of fastener designs and types, in all suitable materials, is available.
Hi I have a 1936 Selmer cigar cutter alto . I have just found out I am playing in a parade in 2 weeks. I have been looking at the instrument and cannot see where you would attach a Lyre . Please can anyone help and if so tell me which one i need. Thanks in advance .Hi,
I am looking for a neck screw for my 1955 Selmer alto.
I have one in it but it is missing the screw on the left hand side if horn bell facing away from you.
Any ideas are all Selmer neck screws the same size also as its a old horn original lacquer i dont want to put a shinning one in as it will look like a gold tooth when you smile
The Lyre goes into the neck clamp area. You probably need the screw.Hi I have a 1936 Selmer cigar cutter alto . I have just found out I am playing in a parade in 2 weeks. I have been looking at the instrument and cannot see where you would attach a Lyre . Please can anyone help and if so tell me which one i need. Thanks in advance .
Ask your band instructor if there’s any laying around.Thanks both, I Can see from the picture where it goes. I do have the screw , I had just assumed that you tighten both screws when you fit the neck. I hadn't realised the one on the left had a different purpose ! So next question any recommendations on which Lyre to get ? There seem to be a number of different ones. Btw I am in the UK .
Cheers
Thanks both, I Can see from the picture where it goes. I do have the screw , I had just assumed that you tighten both screws when you fit the neck. I hadn't realised the one on the left had a different purpose ! So next question any recommendations on which Lyre to get ? There seem to be a number of different ones. Btw I am in the UK .
Cheers
Hmmm 6 x 32 is more like 3.5mm x 0.8 which fits though loose. The 8 x 32 I got should be M4 x 0.8 buit doesn't fit.Try a 6 x 32 UNC 😉
Open the (split) die up a bit if the thread is loose?Hmmm 6 x 32 is more like 3.5mm x 0.8 which fits though loose. The 8 x 32 I got should be M4 x 0.8 buit doesn't fit.
P Mauriat seem to use the same thread as TJ horns.
Have you tried the screw from a Selmer ligature?Hi,
I am looking for a neck screw for my 1955 Selmer alto.
I have one in it but it is missing the screw on the left hand side if horn bell facing away from you.
Any ideas are all Selmer neck screws the same size also as its a old horn original lacquer i dont want to put a shinning one in as it will look like a gold tooth when you smile
