Tech/maintenance Neck Screw for Selmer mk6

Perhaps they do this to give a clue it’s not a Chinese fake , a simple thing but effective to give the buyer a clue , I have a yani fake and the neck screw was a standard 4mm
 
Perhaps they do this to give a clue it’s not a Chinese fake , a simple thing but effective to give the buyer a clue , I have a yani fake and the neck screw was a standard 4mm
I doubt it. I think it probably boils down to whatever threads the designer prefers. For example, if I'm making up a new tool that features a threaded section I'll usually go for metric - but if the threads are small I tend to prefer BA.
 
I can tell you how I go about it, as a mechanical engineer who's been designing mass produced products, assembly tooling and equipment for 38 years, all of it containing threaded fasteners.

First of all, you decide whether you're going to use metric or English (Whitworth/BA is generally obsolete, sorry Stephen). Then you pick from the standard fasteners and threads according to the requirements of the joint. In rare instances you'll have to mix standards, for example a product designed all in metric, but which has to interface with an end user's equipment which uses English; or, as I just recently dealt with, needing an "in-between" size due to space restrictions. I needed something in between M14 and M16 threads that would also interface with a specific O-ring and so I ended up with a 5/8-18 thread in an otherwise metric part.

The use of "bastard threads" - for example, mixed English and metric, or these oddball "standards" that are only found in the back pages of the standards documents, is frowned upon. No employer I've worked for would ever give the sign-off to a simple clamp thumbscrew in either M4 x 0.75 or M4 x 0.8 when the perfectly functional M4 x 0.7 is available, for which the full range of fastener designs and types, in all suitable materials, is available.
 
The use of "bastard threads" - for example, mixed English and metric, or these oddball "standards" that are only found in the back pages of the standards documents, is frowned upon. No employer I've worked for would ever give the sign-off to a simple clamp thumbscrew in either M4 x 0.75 or M4 x 0.8 when the perfectly functional M4 x 0.7 is available, for which the full range of fastener designs and types, in all suitable materials, is available.
Unfortunately it appears that the sax manufacturers of the world didn't get that memo.
It's really not at all uncommon to find mixed thread standards on horn. Just last week I worked on a horn from the early 2000s that featured 4 x 48 thread on the large rod screws and M1.8 x.35 on the small ones.

No need for a helicoil, just get a 6 x 32 tap/die. They're common enough. £20 will kit you out with a set of three taps and a die. Go on eBay and you could probably do it for under a tenner.
 
Hi,
I am looking for a neck screw for my 1955 Selmer alto.
I have one in it but it is missing the screw on the left hand side if horn bell facing away from you.

Any ideas are all Selmer neck screws the same size also as its a old horn original lacquer i dont want to put a shinning one in as it will look like a gold tooth when you smile
Hi I have a 1936 Selmer cigar cutter alto . I have just found out I am playing in a parade in 2 weeks. I have been looking at the instrument and cannot see where you would attach a Lyre . Please can anyone help and if so tell me which one i need. Thanks in advance .
 
Hi I have a 1936 Selmer cigar cutter alto . I have just found out I am playing in a parade in 2 weeks. I have been looking at the instrument and cannot see where you would attach a Lyre . Please can anyone help and if so tell me which one i need. Thanks in advance .
The Lyre goes into the neck clamp area. You probably need the screw.
1720195347257.webp
 
Thanks both, I Can see from the picture where it goes. I do have the screw , I had just assumed that you tighten both screws when you fit the neck. I hadn't realised the one on the left had a different purpose ! So next question any recommendations on which Lyre to get ? There seem to be a number of different ones. Btw I am in the UK .

Cheers
 
Thanks both, I Can see from the picture where it goes. I do have the screw , I had just assumed that you tighten both screws when you fit the neck. I hadn't realised the one on the left had a different purpose ! So next question any recommendations on which Lyre to get ? There seem to be a number of different ones. Btw I am in the UK .

Cheers
Ask your band instructor if there’s any laying around.
 
Thanks both, I Can see from the picture where it goes. I do have the screw , I had just assumed that you tighten both screws when you fit the neck. I hadn't realised the one on the left had a different purpose ! So next question any recommendations on which Lyre to get ? There seem to be a number of different ones. Btw I am in the UK .

Cheers

Either of the Windcraft branded ones will do. Avoid the Yamaha spec ones as they're designed for a larger-sized holder.
 
Hi,
I am looking for a neck screw for my 1955 Selmer alto.
I have one in it but it is missing the screw on the left hand side if horn bell facing away from you.

Any ideas are all Selmer neck screws the same size also as its a old horn original lacquer i dont want to put a shinning one in as it will look like a gold tooth when you smile
Have you tried the screw from a Selmer ligature?
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,066
Messages
578,486
Members
8,131
Latest member
Jef B
Back
Top Bottom