Tech/maintenance Mouth piece patch trouble

eb424

Well-Known Member
Messages
4,216
Location
london
Hi i have a metal lebayle mouthpiece and the beak is slightly curved. I cannot get a mouthpiece patch to stick. Would glue do the job? If so what could I use? clean it first with lighter fluid but none of the patches i have will stay on..
 
Last edited by a moderator:
Cleaning for adhesives is best done with a solvent that is NOT oil-based. Lighter fluid is oil-based. Few pressure sensitive adhesives work well on surfaces with an oily residue. Clean the mouthpiece with alcohol. Make sure it's completely evaporated. Peel the patch from its backing with a clean knife or something similar, not your oily fingers. Place it, then (this is important) use something rounded to rub it down till it's in excellent contact over its entire area.

+1 and amen. Be aware that rubbing alcohol also has oil that leaves a residue.

I suggest having both patch and mouthpiece at body temperature before asking them to bond.

Brrrrr...
 
Vote:
Upvote 0
They bonded then unbonded..ive never seen such a curved beak...it must of caused the previous owner a headache it looks like its been scratched up and tried to flatten..trouble is i really like the piece
The black rubber patches are less stiff and may conform more easily.

Or you might try a good ol' bit of inner tube and rubber cement. Got any bicycle inner tube patches???

Bummer to hear of this issue for you.
 
Vote:
Upvote 0
I'd wash the mouthpiece with washing up liquid and water. Then rinse and dry thoroughly. Then clean with IPA (isopropyl alcohol -not beer). I'd then apply the patch and leave for 24 hours before playing. It may be worth using an elastic band or something to apply pressure to the curve of the beak, I'd avoid extreme temperatures low or high and excessive humidity/condensation during this period.
 
Vote:
Upvote 0
I'd wash the mouthpiece with washing up liquid and water. Then rinse and dry thoroughly. Then clean with IPA (isopropyl alcohol -not beer). I'd then apply the patch and leave for 24 hours before playing. It may be worth using an elastic band or something to apply pressure to the curve of the beak, I'd avoid extreme temperatures low or high and excessive humidity/condensation during this period.
Good advice but difficult to adhere to i play in a caravan...flamin bakin or freezin..lol..
 
Vote:
Upvote 0
If the beak is as curved as it sounds to be maybe you need to cut a notch in the patch so that it can cope with this extreme shape, or even cut the patch in half and apply it as two pieces, or maybe even three, who knows. I'd think about going to buy some Fablon, you only need a strip as wide as the place you put your teeth, about 10cms.
 
Vote:
Upvote 0
If the beak is as curved as it sounds to be maybe you need to cut a notch in the patch so that it can cope with this extreme shape, or even cut the patch in half and apply it as two pieces, or maybe even three, who knows. I'd think about going to buy some Fablon, you only need a strip as wide as the place you put your teeth, about 10cms.
Der...great advice @Jimmymack..whats fablon
 
Vote:
Upvote 0
I have a roll of Scotch tape that's about 1mm thick and 2cms wide that would probably do the job. I don't know where I got it but probably an art shop or good stationers would have it, assuming you can find such a place.
 
Vote:
Upvote 0
A bit of clarity needed before the factoids grow arms and legs

Ethanol, drinking alcohol, is volatile and doesn't leave a residue. Likewise isopropyl alcohol

'Rubbing' alcohol is ethanol or isopropyl alcohol plus additives that do not evaporate
So vodkas cool..its been well filed going to try with evo stick...
 
Vote:
Upvote 0

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,073
Messages
578,624
Members
8,133
Latest member
walthang
Back
Top Bottom