Saxophones Making your own reeds - tools and materials

Chas

Member
Messages
169
Location
England
Hello to every one, I am thinking of making my own reeds , does anyone know where i can buy the tools from and where Ican get the cane/bamboo from any information on making reeds would be helpful thanking you kind people.
 
Before you go down that road, I'd advise you to use reeds that you find too hard to play and make them right!

This will provide a great preliminary exploration before jumping into the making of reeds from scratch!

I know many double reeds instruments players make their own reeds, but saxophone and clarinette players? I don't know any who do!
 
I have made bassoon reeds myself, but I didn't start from unprocessed cane. I, like most amateur DIY double-reed makers, start with gouged, shaped and profiled (GSP) cane. The reason is that the machines to do gouging and profiling are too expensive to ever recover the cost unless one sells lots of reeds.

I don't understand why a saxophone player would want to make their own reeds, but if you are determined to do so then you need to decide how far back you want to go. Must you start with unprocessed cane, or is shaped and profiled cane OK? I'm not sure that you can even buy a profiling machine for saxophone reeds, and it would be very tedious and inexact to do profiling with a knife. It would take a very long time before you could make a reed that was better than a bought one. My bassoon teacher used to say that one has to have filled a wastepaper basket with failed bassoon reeds before one can expect to make good ones reliably.

The saxophone equivalent of GSP cane would be what @saxyjt recommends - get a box of reeds that are too hard and whittle away at them until they are how you want them. There are sometimes cheap boxes of reeds on eBay. You could start by getting reeds that are a half-strength too hard, and adjust them.

The only equipment you absolutely need would be a very sharp knife and some sandpaper. But you might find a ReekGeek useful. I would also recommend making a mandrel out of a broom handle.
 
I think that if you are starting from unprocessed cane, the tools you need are:
Splitter - to split the round cane into segments
Pre-gouger - I don't know why, but gouging seems to happen in two stages
Gouger - to make the bottom of the reed flat (or round in the case of a double reed)
Shaper - to make the reed the right width
Profiler - to cut away the outer cane to form the tip
Tip cutter - these are relatively cheap

I imagine that French-filed reeds require another machine as well.
 
Information on how to make reeds.

That's my birth region! 😛 I don't know if you can appreciate the singing accent in the Marca's founder's voice. Typical of the region. I can speak English that way too! 😱 But then nobody understand me, wich is not exactly the point. Well most of the time!

The only equipment you absolutely need would be a very sharp knife and some sandpaper. But you might find a ReekGeek useful. I would also recommend making a mandrel out of a broom handle.

I have made a SATB version of it, if you're interested:

IMG_20180404_142457961.webp


Good luck!

The cane I cut last summer, in our vacation home in the Var, is still waiting for an hypothetical attempt to make some reeds myself. But it's such a wild idea, for me, that I'll probably postpone it indefinitely!

NB: I have a long history of trying things like shaping a surfboard, making various types of skateboards and other projects I must have forgotten about for the right reasons, that I now know when I should refrain from investing a lot of time, energy and possibly money in a project. :optimistic:
 
Thanks for all the information on reeds, I have a workshop full of tools from my business, and would like to start making reeds has a business .So all the information is very helpfull, I have some really old books on how to make them but there written in french so I have to get these translated, so as I say , when I'm rained off which as been a lot this year I will be in the workshop reed making hopefully. ;you buy a box of reeds and your lucky if you get 3 good ones. ;so watch this space for a new name in british reed maker's, once again thanks to you all and please keep sending the info
 
When I started out I was very fussy about reeds and blamed them for all my problems. These days 10 out of 10 play out of the box, some better than others admittedly. Whittling on rainy days seems a good way to kill time but not a profitable business opportunity.
 
When I started out I was very fussy about reeds and blamed them for all my problems. These days 10 out of 10 play out of the box, some better than others admittedly. Whittling on rainy days seems a good way to kill time but not a profitable business opportunity.
Thanks for the info Colin cheers bud charlie

The most difficult part of making reeds is rating them after they are made. The machines detect the bend very accurately but they dont address playability very well if at all.
Thanks for the info cheers charlie charlesworth
 
Arise, ye thread.

I was in the YT rabbit hole and apparently this tool the Reedual, was around when Chas made the OP.

$1200 might seem a bit pricey to make your own reeds, but on the other hand if playing is your living it's not too out of line with cost of tools in other professions.

Or maybe a bunch of amateurs could start a reed making co-op?

edit: So I guess there are lots of clarinettists making reeds themselves? Why are saxophonists being left out? 🙁 (I spoke too soon -- there is a Bari player!)

View: https://www.youtube.com/watch?v=RwgwVs41uHQ
 
Last edited:
Before you go down that road, I'd advise you to use reeds that you find too hard to play and make them right!

This will provide a great preliminary exploration before jumping into the making of reeds from scratch!

I know many double reeds instruments players make their own reeds, but saxophone and clarinette players? I don't know any who do!
It used to be part of standard single reed teaching to learn how to make reeds from a blank. Once the students got past that, no one ever made them from blanks.

Blanks are, I believe, still available. A friend of mine back in 2019/2020 was developing a custom reed milling machine and he was buying blanks from SOMEWHERE.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,062
Messages
578,396
Members
8,129
Latest member
Bartman
Back
Top Bottom