Tech/maintenance Maintenance & Cleaning Stuff

My argument is why not use an oil that is made specifically for that application with the proper viscoscity? It is not that expensive. Maybe using a "gear oil" or "motor oil" won't hurt, but is that the best possible choice? I do not know even one professional tech who uses "gear oil" or "motor oil" on woodwind keys in the U.S.

And my argument is that the action on woodwind instruments is so crude (in engineering terms) that virtually 'any old oil' will do - providing it stays put.
I mean, c'mon...£173 for a litre of oil, for a saxophone? The engine in my BMW is a masterpiece of modern engineering, and has to cope with extraordinary operating conditions - yet even a high spec oil for it barely hits £15 a litre. Even a litre of oil for your jet will only cost around £30 a litre.
Am I being asked to believe that the lubrication requirements for a horn exceeds that of a car, or a jet turbine?
Did the 'research' for developing a specialised musical instrument oil really cost that much??
It's complete bollox.

And what's the point of recommending a super-duper mega-priced lubricant if it's going to be put on top of whatever's already in the action? It's like pouring a finger of Islay malt into a glass that's still got the dregs of last night's Special Brew sloshing around the bottom. Utterly, utterly pointless.
If you can strip, clean and degrease the entire action (pillars too) and replace it with whizz-bang oil - fine, you'll get the benefit (assuming there is one)...otherwise it's like nipping out in the dead of night and sticking a 'Turbo' sticker on the back of your Lada in the hope of impressing anyone who comes up behind you.

If you examine what happens to the oil in an action, how it moves, where it ends up, it soon becomes abundantly clear that the whole system has a major built-in flaw - oil is pumped in and out of the key barrels and in so doing picks up any contaminents that have come to rest on the pillar faces.
It's the ultimate leveller.

Here's a little Stevie project anyone can do at home (ask your parents first though).
Take a sheet of clear polythene...one of those little resealable bags is ideal. Make sure it's nice and clean.
Pop a drop of oil onto the outside of the sheet/bag - then leave it somewhere convenient in the room where you usually practice. For best effect leave it somewhere chest height.
When you're next playing, be mindful of where you place your sax. Do you put in on the floor, or on a stand maybe? On the sofa? Place the oiled sheet/bag in the same area for a while.
Try placing the sheet inside your horn case and close/open the lid a few times.
Give it a week, maybe two..maybe a month or more if you like - and then hold the sheet over a piece of white paper (shine a light on the paper for best effect) and see what's in the oil.
Most of what you'll see isn't going to be of much concern - it'll either be too big to find its way inside the keywork, or too soft to be of much consequence. If you have a microscope handy (and who doesn't?) you might notice smaller, darker dots. Some of this is going to be grit - tiny particles of sand/stone that are light enough to be carried in the air. Handfulls of this stuff gets lifted off the floor and propelled into the air every time you open a door, or sit on your sofa...or jig about while blowing changes over 'Mustang Sally'.

If anyone wants to report back with their results (pics too, if you like), it'll be interesting.

So - provided the oil meets a few basic criteria (stays in place, doesn't dry out, doesn't eat through the action, doesn't kill you), it's all you need - and until someone finds a way to stop the oil being contaminated in use, it'll remain all you need.

As for 'no other tech uses it' - I've had two tenors in this week, both having been 'repaired' recently by other techs. One cost £150, one cost £37 - and neither of them work. The £150 job won't go below A without a struggle (and even if it did, it wouldn't get much further), and the other one falls on its arse at F.
So, I'm probably rather grouchy and even less inclined to give credence to what other techs do than I was before.
 
Now Steve......are you saying I can put jet oil into my 325 TDS BMW?

If it's anything like my 525 TDSE was, you can probably use lard.

Tell you what I did learn though, always use genuine oil filters - all the OEM oil filters I've used on my Bimmers have split.
 
I have had very good results using Music Medic Ultimax Synthetic medium viscoscity key oil. The 5ml needle oiler is the perfect size. I also purchased the 16 oz bottle to refill the needle oiler as needed. As a professional repair tech who specializes in complete overhauls, this amount of oil is more than a lifetime supply. A do-it-yourselfer could get by with the 5ml needle oiler for several years applying the correct amount. For an individual to buy a liter of any oil to use on woodwinds unrealistic regardless of the price.

As I wrote earlier, most of the techs in the US that I have spoken with at conferences, clinics, and on the internet have gone to the synthetic oils made specifically for musical instruments. Most brass players/technicians prefer either the Hetman or the Alisyn Synthetics. Most of the woodwind techs use the Ultimax from Music Medic.
 
So - provided the oil meets a few basic criteria (stays in place, doesn't dry out, doesn't eat through the action, doesn't kill you), it's all you need - and until someone finds a way to stop the oil being contaminated in use, it'll remain all you need.
Born in a Harbor city I have talked with several people who transport all types of oil and grease for a living. On the subject of cleaning they all agree that oil has a memory, it absorbs all sorts of oil and grease. The only way to keep the oil clean is to remove all traces of oil and grease before you use a tank for a new type of oil/grease.

Recently I cleaned a badly maintained Bundy and noticed that al rods where sticky except for the axis of the side Bb and C.
When asked the owner, he told me that when he oiled the sazxophone he didn't do these side keys as he didn't use them.
Probably the oil evaporated and took the smaller molecules of the grease with them. Here oiling increased the viscosity of the grease in time, resulting in using more oil.

It is important to clean all axises and screws regularly. I clean my horns every year and apply a new layer of multi purpose grease (acid free with some lithium to prevent metal oxidation). Never found a good reason to use oil.
 
Recently I cleaned a badly maintained Bundy and noticed that al rods where sticky except for the axis of the side Bb and C.
When asked the owner, he told me that when he oiled the sazxophone he didn't do these side keys as he didn't use them.
Probably the oil evaporated and took the smaller molecules of the grease with them. Here oiling increased the viscosity of the grease in time, resulting in using more oil.

It is important to clean all axises and screws regularly. I clean my horns every year and apply a new layer of multi purpose grease (acid free with some lithium to prevent metal oxidation). Never found a good reason to use oil.
What tends to happen with grease is that it can dry out and become rather like a wax or dry lubricant. When oil is added is dissolves the grease and forms a sluggish slurry.

The are advantages to using grease - and disadvantages too. Same with oil.
 
I recall Steve advising on EP80, and that's all I ever use. A tiny amount at each pivot point when reassembling a horn.
But I think grease is mainly to stop linkages rattling, e.g. old Yani and Yamaha side key linkages.
Where else should grease be used?
I use ordinary cork grease everywhere a lever slides along another linkage. On my bass sax, that's the following places:
- All palm keys
- All side keys
- Octave
- G#

Doesn't make any difference with rattling, but does make for smoother action and keeps things from binding.

Here in the US, EP80 is not a grease but an industrial floor coating. Not sure how that would work as the linkages in question are usually some sort of rubber/plastic sleeve contacting cork or metal. Also wouldn't make sense for the average player to buy a huge bottle of EP80 when a single tube of cork grease would probably be enough for a hundred horns over a lifetime.
 
Ah, makes sense. We do have that in the US. In fact I have some in my garage. Pretty unpleasant smelling stuff.
Once it's been used it's even worse. I drained some from a motorcycle bevel drive where it had been mashed around for 20,000 miles, and it was absolutely revolting.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,588
Members
8,133
Latest member
walthang
Back
Top Bottom