Have you tried @Nick Wyver 's Thumb™ ligature? If you get a nice G you know where the problem is.
Also the reeds that you have might be warped.
I checked them on my other mpc and they are fine.
I spent some time tweaking my ligatures as I have a feeling there is an issue here as it looks like the front part of the ligature is a bit loose. I tried to correct that and it improves the situation, but doesn't fix it.
And what kind of issue do you exactly have?
How far on the cork?
All you need is a card or leather shim at the front.
If it's anything like mine (Yanag B900) there's barely any cork showing and if it's a bit chilly the cork is completely covered.Ok. Try pushing thi mouthpiece on the cork as far as it comfortably goes. I suspect that only a small portion of cork should show.
S80 C*?
You are facing a much bigger tip now.
I'm pretty late to this thread, but thought I'd share the ligature I've been using for a year with both my PPT bari mouthpiece and bass clarinet - the Nova ligature from Bambu: NOVA LIGATURES | vientosbambu The bass clarinet size work really well with the bari PPT. I also like the (cheaper) standard ones: Hand-woven ligatures | vientosbambu, but I'd say the Nova is worth the extra 40 euros.I have pretty much found my reed/lig comfort zone for the PPT alto and tenor, but the bari is a different story. Before I go GAS crazy again, I need to hear what you bari-players have found to be compatible ligatures. The lig for my bari pickle mpc is too large, and the Chinese lig (which I dislike) is hard to center on the reed. Help.
