Tech/maintenance Leak light on a baritone

Pete Thomas

Admin
Cafe Moderator
Messages
23,638
Location
London
Level
Retired professional
OK here I am proud of my DIY LED strip leaklight. Usually use a cigarette paper but clean out of them.

So I say to myself I can find the leak in this old baritone, but how?

Easy way is to feed it down the top E.

Bingo find a leaky bottom B and adjust it. Job done.

Play the horn still leaking. I eventually found it.

Obviously the leaklight down the top E is not the best way to find a leaking top E. Doh.
 
Last edited:
Congrats on finding the leak. I have an extra long LED light so on bari I remove the low C key and run that up to the top of the sax which covers most of the stack keys. For the bell keys, I use my 12" fluorescent down the bell, and for the palm keys, high E and F# I use a short flexible light to go through the pig tail, or up from the side C. Bari's are my least favorite sax to work on, but I found they got much easier when I got a sax work fixture which holds them up off the bench top.
 
the low C key and run that up to the top of the sax which covers most of the stack keys.
But then I’d have to put it upside down on the stand as if I’m selling it on Facebook. And it would fall off so even more leaks.

Why don’t they make a leaklight access point in the pigtail you can unscrew and bung your leaklight down?
 
Yep - and even if it doesn't reach quite that far there's usually more than sufficient light (in a darkened room) to spot any leaks on the top bow pads.
Anything suspect can be further checked with a feeler.
 
I have a LED flex light. The lead wire is 460mm / 18”. This goes to just about anywhere. Check with your local industrial supply.
1670822809240.webp
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,075
Messages
578,673
Members
8,134
Latest member
banjo
Back
Top Bottom