You can typically compensate about 4 Hz on the A=440 standard. Flutes built at A=435 can kind of sort of be played at A=440 by shortening the headjoint, but as I noted above, the low notes are flat, the high notes are sharp, and you've got to develop various gyrations to compensate. Generations of flutists did this, but moving from a "few Hz off scale" to "the exact scale" is a real revelation, as I've experienced myself.
Yes, these days a lot of orchestras, especially in Europe, are tuning to 442 or even 444. I'd say for most instruments 444 is right at the raggedy edge of compensable, depending on the instrument. For example, if you've got a valved brass instrument, you can't push the tuning slides in any further than you can push them in. You could have them all chopped, and then if you pulled them for playing at 440, you'd probably be OK. For woodwinds, you really can't do much as the tone holes are totally fixed. String instruments can be tuned to whatever pitch you want, up till they start folding up from excessive string tension or until that high unwound string breaks whenever you look at it wrong.
I will also note that in the US A=440 is still the accepted standard and very few ensembles are tuning higher. I don't know the situation in Britain; as I noted on the continent a higher tuning is common; and I don't know anything at all about tuning standards in the rest of the world.