Mouthpieces guess the mouthpiece/s...

If the cork has become compressed warming it may expand it.

Valentino synthetic cork seems quite resilient and accommodates small differences in mouthpiece bore quite well.

Depending on how much the difference is, fitting the larger bore first and waiting while the cork compresses, then removing it and trying the smaller bore before the cork rebounds, may work.

If not, it's a case of pick one and stick to it.
 
I don't have any Valentino cork right now although I've used it in the past and it's fine. I have plenty of natural cork so I'll give it a go.

Meanwhile, I think the HR is an S80 not S90...

20240817_150520.webp


...and being an F tip it will be interesting to try it against my F Soloist.

The Jazz has polished up nicely...

20240817_150627.webp

20240817_150643.webp


Just a shame about the bite plate grooves. Did teeth really wear the metal away! Bond's "Jaws" a previous owner perhaps?...

20240817_150726.webp


I always use a patch so it's not a problem in playing. Anyone seen such grooves before?
 
Meanwhile, I think the HR is an S80 not S90...

I always use a patch so it's not a problem in playing. Anyone seen such grooves before?
I think you're right about the HR one. Never seen grooves like that, right across the metal. Looks like someone's been at it with a junior hacksaw.

Looks like you got a bit of a result with those mouthpieces. I've had examples of both those models, and to be honest, i don't like the way they play, but they're easy to sell for reasonable money to people who like that sort of mouthpiece.
 
What's the sax, BTW?

Re the cork, I'd go as you suggest with sizing for the Yamaha bore, and use good quality cork, which will have more spring and rebound than cheapo Amazon stuff.
 
Can a new cork accomodate such a wide spread of MP bores?
When it is necessary to use mouthpieces with different bore on one crook I sand the cork to the smallest bore. For the other mouthpieces I use shrink sleeve on the cork, sand the sleeve to the right diameter, take it off and glue it in the mouthpiece.
 
When it is necessary to use mouthpieces with different bore on one crook I sand the cork to the smallest bore. For the other mouthpieces I use shrink sleeve on the cork, sand the sleeve to the right diameter, take it off and glue it in the mouthpiece.
...and it you later wish to use that mouthpiece on a different horn with a normal diameter cork...?

:confused2:
 
What's the sax, BTW?
I had one before, but rather scrappy, and sold it as a do-er upper. Nice sound though.

This one is far nicer. Selmer London Super Pennsylvania, or Yani T4, same as the first (preferred) one Steve reviews here: Selmer (London) Super Pennsylvania (Yanagisawa T4) tenor sax review

One missing piece of cork on a side key foot replaced too. Crook now re-corked and left overnight before I sand it down. Then I'll try it side by side with my MkI YTS-62 and see which I prefer.
 
I had one before, but rather scrappy, and sold it as a do-er upper. Nice sound though.

This one is far nicer. Selmer London Super Pennsylvania, or Yani T4, same as the first (preferred) one Steve reviews here: Selmer (London) Super Pennsylvania (Yanagisawa T4) tenor sax review

One missing piece of cork on a side key foot replaced too. Crook now re-corked and left overnight before I sand it down. Then I'll try it side by side with my MkI YTS-62 and see which I prefer.
Mmm nice sax. I have an alto of similar vintage, and it's a fantastic player
 
I think the black small spots around the engraving "Jazz" is corrosion. I have some Larsen stainless steel (surgical steel?) with black spots over the table. That's because the former owner left the reed on the mpc after playing.
 
I think the black small spots around the engraving "Jazz" is corrosion. I have some Larsen stainless steel (surgical steel?) with black spots over the table. That's because the former owner left the reed on the mpc after playing.
Yes, the Plasticover reed had been left in situ.
I think once again that so long as the table has no outward protrusions, only the engraving and some small pitting, and that these do not affect the seal at the edges, then the MP should play fine.
I suspect the edges of the table to be irrelevant anyhow and that only the rails need to offer a "seal" with the reed. Even then, does the reed ever seal with the rails?
My thought is that the reed always stays well away from the rails and its relationship with the table is to keep it level, not to provide any airtightness or resonance assistance.
But I know little about this. Over to the experts?...
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,068
Messages
578,493
Members
8,131
Latest member
Jef B
Back
Top Bottom