Woodpad
Senior Member
- Messages
- 1,637
- Location
- Roosendaal
My material costs per pad is less than 1% of that.So it was 8 pads x ($ 18.89 each)?
My material costs per pad is less than 1% of that.So it was 8 pads x ($ 18.89 each)?
I rather doubt those little animals have thick enough skin to make useful leather.
It would make for small talk with the guitar or violin player: "My pads are made of cat gut, too." 😉^^^^
Might work for pads, but it's a NoNo in the Little Critter Recipe Book.
I gather they are used to do high volume work. Unless something is unusual, most is labour costs with a small amount for parts and supplies with "clean, oil and adjust". The items above and beyond would be extra cost items. Detailed paperwork takes more time. Their "minor costs plus COA" is probably a calculated historical average, cuts down on admin paperwork time.I was just wondering if he had some number memorized 😎
Figuring that I spent maybe $30 US in a pad kit with a few pads extra, say at $50 in parts with my own labour, add tech costs of $151.12 for a total of say, $200.00 for a complete overhaul job, I would say my doing was worth it.My material costs per pad is less than 1% of that.
During late Fall outdoor play, I had a pad pop loose on my Selmer Bundy II alto sax, one of the smaller pads around high C. I had a roll of black electrical tape in my car. Looped it, put the pad back into place, allowed me to finish the night.I wouldn’t do it on a good instrument but might if I needed to do a gig and didn’t have another option.
For the likes of me, that's the bottom line. Know enough to navigate around and keep things ticking over; but leave the heavy lifting to a pro...I wouldn’t do it on a good instrument but might if I needed to do a gig and didn’t have another option.
I'd rather spend my time practicing my horn than working on it. I'll leave that work to my tech, who does a stellar job.
I was the same as you. Living in rural towns for the past 30+ years, the absence of good techs and attempting to find good techs was difficult, so I fixed my horns. Recently I found that Tarpleys, Lubbock, Texas has a decent tech. So, I sent my Bundy II alto and Vito YTS-23 stencil to them. The alto plays like a new instrument. Now just need to wring out the Vito.I wish I had a stellar tech to rely on.
I bought my first instrument from a very good tech and live in the area with the most techs. Still when studying I became self sufficient as I found the tinkering soothing. I have seen a few techs that can rival the first and seen a lot of bad repairs from others. The best techs attract so much work that they have a terrible waiting list. I can repair most things in a few hours so only in a few cases I will ask a tech do some work on my saxophones. They are always suprised when they see my home made pads.I wish I had a stellar tech to rely on. Lack of one is what drove me to tackle my first overhaul. Our local shop is really only interested in school work. I don't trust them with anything more than basic dent work. If I have to explain to the tech what I mean by "neck tenon" then they're not touching my horn (yes, actually happened).
The alternative of shipping half way across the country to a qualified tech isn't appealing either. That Buescher tenor I mentioned in post #55 arrived to the tech after being dropped or thrown hard enough for the neck receiver to break through the side of the wood case, bending the body tube.
