Chris98
Senior Member
- Messages
- 1,135
I have a decision to make that I should really be concentrating on right now... So I’ve decided to adopt the subtle art of distraction in a way of allowing the important decision time to mature in my subconscious ready for when I can’t procrastinate any further...
As this thread has maneuvered itself into the Yamaha neck territory I thought I’d bring myself up to date... As you can see I’m really avoiding that decision...
So here we go:
My old Yamaha catalogue showed a number of custom necks:
For Alto:
G1 and M1
For Tenor:
G1 G3 M1 and F1
These are all Customs, the 82’s came with the G1 neck as did the 875 alto, but the 875 tenor came with the G3.
The catalogue gives no information on the difference between any these necks or the F1 and M1. My suspicion is that the M1 is close to the old 62 neck before they came up with the non custom G1.
Looking on Yamaha’s site they seemed to have realised they were missing out on offering different necks and actually given some details about their necks this time... But they have also done away with the old models, so today we have:
AE1, AC1, AV1 if you want them in sliver add AG at the end (AG being the symbol for silver in the periodic table! Personally I think using 47, the atomic number would have been a bit more classy.)
Can you imagine it...
It just sound just so much better than:
But I might be digressing a bit here....
For the tenors substitute the A for a T and you’ve got the swan neck.
E is the medium bore “quick response and superb intonation.”
C is the smallest bore and based on the original 62.
V is the largest bore “free blowing and extremely flexible”
Yamaha do a rather fine job of visually representing the differences:
As C1 is based on the original 62 neck, it is perfectly clearly that the original 62 neck was intended for beginners, hence it's popularity with a few professional players here and there that you don't often hear about.
So there we are... Or so I thought....
The 62 MkIII comes with a new 62 neck. The MkII had G1 stamped on the neck and the new one has 62 stamped on it, which is presumably different from the original G1 and the new E, C, and V custom models, so where in the graphical representation of tone does it sit? And how about the old G1 and G3 necks for that matter?
The Custom Z now comes with the V1 but the Custom EX still comes with the G1 for alto and G3 for the tenor.
For those looking for the Classic 62 neck... well according to my old Yamaha sax catalogue the 475 series of horns came with... “a classic 62 style neck for optimum sound and playability.
I’m not sure how the 480 series fits in, they have obviously updated the neck socket as it can now accommodate the custom necks, but if the neck is the same as the 475 or not, I do not know.
I'm not sure I'm much the wiser after any of this...
As this thread has maneuvered itself into the Yamaha neck territory I thought I’d bring myself up to date... As you can see I’m really avoiding that decision...
So here we go:
My old Yamaha catalogue showed a number of custom necks:
For Alto:
G1 and M1
For Tenor:
G1 G3 M1 and F1
These are all Customs, the 82’s came with the G1 neck as did the 875 alto, but the 875 tenor came with the G3.
The catalogue gives no information on the difference between any these necks or the F1 and M1. My suspicion is that the M1 is close to the old 62 neck before they came up with the non custom G1.
Looking on Yamaha’s site they seemed to have realised they were missing out on offering different necks and actually given some details about their necks this time... But they have also done away with the old models, so today we have:
AE1, AC1, AV1 if you want them in sliver add AG at the end (AG being the symbol for silver in the periodic table! Personally I think using 47, the atomic number would have been a bit more classy.)
Can you imagine it...
“Hey sax god what you playing?”
“Well I got me this here AC1-47 on my 62 with a 4C refaced to 9*”
“Well I got me this here AC1-47 on my 62 with a 4C refaced to 9*”
It just sound just so much better than:
“yeah I got this AC1AG” - That sounds like a moped.
But I might be digressing a bit here....
For the tenors substitute the A for a T and you’ve got the swan neck.
E is the medium bore “quick response and superb intonation.”
C is the smallest bore and based on the original 62.
V is the largest bore “free blowing and extremely flexible”
Yamaha do a rather fine job of visually representing the differences:
As C1 is based on the original 62 neck, it is perfectly clearly that the original 62 neck was intended for beginners, hence it's popularity with a few professional players here and there that you don't often hear about.
So there we are... Or so I thought....
The 62 MkIII comes with a new 62 neck. The MkII had G1 stamped on the neck and the new one has 62 stamped on it, which is presumably different from the original G1 and the new E, C, and V custom models, so where in the graphical representation of tone does it sit? And how about the old G1 and G3 necks for that matter?
The Custom Z now comes with the V1 but the Custom EX still comes with the G1 for alto and G3 for the tenor.
For those looking for the Classic 62 neck... well according to my old Yamaha sax catalogue the 475 series of horns came with... “a classic 62 style neck for optimum sound and playability.
I’m not sure how the 480 series fits in, they have obviously updated the neck socket as it can now accommodate the custom necks, but if the neck is the same as the 475 or not, I do not know.
I'm not sure I'm much the wiser after any of this...


