Saxophones David's interesting finds - Beaugnier Vito Special from the Attic

20220628_161834_001.webp
20220628_161808.webp
20220530_181707_001.webp
20220628_162253_001.webp
 
Yes I dismantled the bell keys to begin with and reassembled at the end of each day so I could play test it to check my work then when I got to the top stack which was really difficult I left it dismantled as I used softer and softer grit wet and dry ending with silver polish.
 
In addition to the above with time and patience it can be very satisfying as the work progresses, when the laquer is gone it's easier to see not only how the sax was built but the quality of the workmanship.
During my working life I worked as a electro mechanical assembler tester for about 20yrs and was taught fine pitch soldering ect therefore I think this sax was definitely a quality product when new and is a pleasure to own. Because of this against my better judgement I caught the bug and bought more 🙂 but in better condition.
 
Thanks it's still a work in progress though some new rods palm keys and side keys also the key hights seem low but I'm no expert, and what a racket not a piece of felt anywhere I'm sure it can be quieter.
 
Yes I dismantled the bell keys to begin with and reassembled at the end of each day so I could play test it to check my work then when I got to the top stack which was really difficult I left it dismantled as I used softer and softer grit wet and dry ending with silver polish.
Hats off to you for the effort. I know exactly what it takes. A lot of time and patience and more than one pint😉 it’s quite something to sit back and look at the beauty of one of these when it’s all finished. No matter the value of the maker.
On preserving the finish. Look into the possibility of a light coating of pure mineral oil. It retards the oxidation. There are also waxes. But I have no experience with those.
Enjoy !
 
Thanks everyone for your suggestions my apologies for not replying last night David but my eyes started to close, they tell me it's an age thing, 🙂 I did use Atosol on a Kolhert tenor made in Holland which is nickel plated never thought of an electric toothbrush.
At the moment it is acquiring a nice dark patina and think no hope it will never return to it's previous neglected condition at least while I own it, but I have in mind should I polish it in the future I'll try museum polish which must be good if they use it.
Fortunately my other horns are in much better cosmetic condition and of course I wouldn't dream of doing any of the above on a rare priceless artefact. Other saxaphones Buaegnier tenor one of the later ones tone holes on right side of bell but older style pinky table, vito 35 system x4 and I don't think I ought to be able to buy them but, the best one heading to Maidenhead in couple of weeks for overhaul only been waiting 4 months I should have trained as a tech!
 
My Vito Special (kindly identified by @JayeNM) is all I have now and all I need, during my years of playing I have owned and played many fine instruments but the 2 Beaugniers (Noblet Tenor and current Vito alto) have suited my standard of playing as much as any of the others.

I have spent a bit on it over the years but for an original investment of £80 has proved to be one of my better deals, the addition of a Lawton 6 at double the price of the saxophone gives me everything I need.
 
Yes it's what i expect to happen probably the buaegnier tenor, maybe the model 39 vito alto and I intend keeping at least one 35 system but I will have experienced playing my true tone alto, conn "chu berry" alto, king cleveland alto and pensalvania special full pearl alto so when I hear people comparing a buescher and a conn I will hopefully understand a little better, also I did not spend a huge amount on my collection it was a choice between all these or possibly one mk6 but I think I'm the winner so much choice and being retired I have a lot of catching up to do.
I also picked up a Pan American tenor which needs some solder and maybe an overhaul but this one was made by Martin and some people say properly set up no matter the model they are all good, time will tell but I need a hobby🙂
 
Oddly enough the only saxophones I regret selling (and there have been a few) were my Noblet/Beaugnier tenor , a Conn 10m and my Martin Indiana alto.
 
Well this pan american looks like an Indiana and although it's fragile with a loose post and the neck looks like it is a Martin the number doesn't match but I can play it although it does need to go to a good tech.
Bye the way I have to curb myself re more saxaphones but I can still look and I notice Saxquest in the USA are clearing some horns which need work as their repair shop is booked up and they have a nice Noblet/tenor for sale but I have resisted though I did buy 2 of my 35 systems from the USA and the Buaegnier tenor from Hong Kong so buying abroad can work if your carefull not sure about the EU after brexit.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,077
Messages
578,685
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom