Tech/maintenance conn baritone sax handle replacement

antonyantony

Member
Messages
21
Guys
I'm looking for a replacement leather handle for my Conn 11m 1960s sax case. I can find smaller handles but nothing as hefty as the one on the case.
Any ideas?
I'm base in the UK
Cheers
 

Attachments

  • handle.webp
    handle.webp
    72.7 KB · : 211
Is the handle OK (decent integrity) under the leather or does it look like it may fail completely ?

The instrument case is basically just luggage, so if you can find a suitcase repair shop they should be able to do something for you. But do stress to them how heavy and valuable the instrument is.

Alternatively you could get a replacement case.

Good luck

Rhys
 
I did a search on your amazon.co.uk website using the search term, "replacement leather luggage handle". It came up with a number of possibilities. For example, just a little ways down found:

for £7.53 and
for £6.49.

I do not vouche that these will work for you, but by doing a careful scanning of the rest of the search items may find a suitable permanent or interim fix that should be strong enough and last a while.

Knowing your exact parameters for fit, I think that you may be able to find a suitable fix. Then too, a luggage repair shop may be able to help. An instrument repairer may also have something suitable from their catalogues and sources, too.

Good luck!
 
@antonyantony these have a steel shank that’s nicely leather covered. It will hold that Bari case no problem.
Dunno if they ship to UK. Was $25 USD included shipping here. @Greychatter found this for his case. I just installed it. Honestly the best bang for buck I’ve ever seen.

Size states 6”-7”. I had to bend it some to fit @6”.
1763956878703.webp


1763956928800.webp

1763956978684.webp

1763957024318.webp

1763957100459.webp
 
Thanks for all the comments! Chandlers?? What was I thinking, saddlers! I’m actually looking for the exact replacement ie a Conn handle. I’m going to visit a leather place in west Essex and see what they can do.
Thank you again
 
If you have no luck with your trek to others, here is one that can handle the weight of a guitar amplifier, it is black leather with internal steel reinforcement, 17.5 cm long, appears to be a close match to your Conn handle, £19.64:

51Pa-2gk+EL._AC_SL1500_.jpg

21QruY+ddjL._AC_.jpg

Amazon UK photo

However, your visit to that leather place in west Essex sounds good as they will immediately see they weight of your case with sax and all, to find a suitable yet strong replacement.
 
I can’t find the one I put on my 1930s coffin case. It required lifting the lining and bolting in the new handle in place. I sold it some years ago locally. The Pigsquealer one looks tough, aesthetically good and easy to install. I wish I had found that for ease I could have kept the old metal bits. The bolts on the full handle and bolted on metal bits tend to be quite long and need cutting to stop them wearing through the lining. There is a picture of the handle I put on on Trevor Jones website but I think I must have bought it in a local hardware store rather than online Vintage Pennsylvania Baritone Saxophone
 
I did take it to a local bag repairer first and he tried to stitch the 90 year old powdering leather. It looked a mess and broke as I was carrying it falling down steps and putting a key out of kilter hence my DiY
 
The Conn bari cases, at least mine, originally came with something almost identical to PigSquealer's handle, except without the steel reinforcement. When mine (without the steel) finally gave up the ghost I couldn't find PS's one (I knew they were out there, but I needed to put something on there chop chop),. so I just took several turns through the rings with nylon cord, then wrapped the cord around that to form a handle. That's been on there for something like 25 years now. So, really, it comes down to just how fancy you want to be. My old case, all the fabric long since fallen off, patched multiple times with fiberglass, and brush painted flat black, is there to absorb all the slings and arrows I don't want to subject my horn to; so I really don't care how it looks. The rope handle serves me just fine.
 
I waited to chime in after more productive responses. But hey, I'd go old school. My old Conn bari case had a proper piece of rope tied to the rings to pick it up. Until I burned it... which was the thing to do from the beginning.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,057
Messages
578,193
Members
8,127
Latest member
PJ2116
Back
Top Bottom