Mouthpieces Brilhart Level Air - what reeds?

I have four Level Airs - an alto one from the late 1960s, a tenor from the early 1970s, and two modern ones (alto and tenor) that Selmer USA re-introduced in the early 1990s. The modern ones were supposedly made by Runyon and have two plastic interchangeable baffles - one a wedge shaped baffle and the other are more roll-over style baffle. The modern ones also look nothing like the originals. When Selmer re-introduced them Selmer said they re-designed them to make them more comfortable to play. I quite like all the Brilhart models I have - the vintage ones are not as edgy as you would suspect and the modern ones with the wedge style baffles inserted can be quite loud.

Greg S.
 
I just remembered that as well as the three Level Air mouthpieces in stainless steel, I have a black plastic one for alto. I think the plastic ones are quite rare.

It has a fatter body that the metal ones and although it shares a similar internal design, the step baffle occurs further away from the tip and almost to the end of the window. I think it plays well but can't remember comparing it with the metal Level Air for sound, resistance etc.

It doesn't have a serial number on it, but is marked as 7*. By eye it seems to be only a small amount more open that my 4* metal alto Level Air (maybe 5 thou' more open).

Rhys
 
Do you remember the Strathone (?) sounds similar

I associate the Strathon Adjustatone sound with Tom Scott who played one on tenor from the late 1960s / early 1970s to probably the late 1980s / early 1990s. I read an interview with Tom who explained how he was playing in the house band for the "Glenn Campbell Show" and one of the old school studio jazzers (Buddy Colette? or Jerome Richardson?) who played in the horn section with him suggest he try the Adjustatone instead of the Berg Larsen he was playing on at the time. I think Richard Elliott played an Adjustatone for a time as well. The modern 1990s Brilhart with the wedge shaped baffle inserted sounds more like a Berg Larsen XXX/0 or XXX/1 with a bit more control.. :rofl:

Greg S.
 
I had a Strathon Adjust-tone and used it on this track!
Quite a different piece in fact, but I agree there were similarities in the tone quality when you push the baffle into the highest position: gruff with less super high frequencies than a lot of the modern high-baffle pieces.

Purchased that album when it first came out, I was 19 at the time - 35 years ago...where did the time go...:w00t:

Actually listened to the album a couple of weeks ago - good old vinyl...:thumb:

Good album Dave...a favourite of mine...

Greg S.
 
Purchased that album when it first came out, I was 19 at the time - 35 years ago...where did the time go...:w00t:

Actually listened to the album a couple of weeks ago - good old vinyl...:thumb:

Good album Dave...a favourite of mine...

Greg S.
Thanks Greg! Yes, 35 years ago. My playing has changed a bit in the meantime, but I still dig Tom Scott, especially his older albums! New York Connection was a big favourite of mine.
 
I associate the Strathon Adjustatone sound with Tom Scott who played one on tenor from the late 1960s / early 1970s to probably the late 1980s / early 1990s. I read an interview with Tom who explained how he was playing in the house band for the "Glenn Campbell Show" and one of the old school studio jazzers (Buddy Colette? or Jerome Richardson?) who played in the horn section with him suggest he try the Adjustatone instead of the Berg Larsen he was playing on at the time. I think Richard Elliott played an Adjustatone for a time as well. The modern 1990s Brilhart with the wedge shaped baffle inserted sounds more like a Berg Larsen XXX/0 or XXX/1 with a bit more control.. :rofl:

Greg S.
Hi Greg

Nice one. I thought I remembered it being a Scom Tott (juvenile joke between me and my mate when we were juveniles) thing though I didn't like to say in case I'd remembered wrongly. I tried one once and thought it was a bit worse than awful...
 
Thanks Greg! Yes, 35 years ago. My playing has changed a bit in the meantime, but I still dig Tom Scott, especially his older albums! New York Connection was a big favourite of mine.

Hi David, what a massive sound you get on the Strathone - so thick. Monster harmonics sir!
 
Hi David, what a massive sound you get on the Strathone - so thick. Monster harmonics sir!
Well thanks! There is probably a bit of 'studio magic dust' on it to be honest. It was rather an extreme performance and one that I don't normally follow, but at the time it made sense to match the energy of the track. And it was many years ago, I would feel a bit shy to make that sort of sound now.
 
FIRST POST EVER ..I've played on Level Airs for quite a number of years. The original stainless models can be split into two types. The pre and post Selmer buy out in 1966. The pre buy out Carlsbad pieces are undated and can have 4 or 5 digit serial numbers seemingly chosen at random. They have cross mill marks on the facing, a polished baffle, more refined bite plate, different lig screws and in my long experience are generally far better players than the dated post 66 Selmer faced models. They vary a lot in the tip openings and can even be 10 or more thou either way. I play a 9 ( 115) baritone , a 7* ( 108) tenor and 2 5* ( 79 and 81 altos). I have a couple of spare tenors for sale .. a 7 ( 95 original) and an 8 ( 105) refaced by Eric Greiffenhagen. I'm always looking for pre 66 altos in 5 and 6. I play these on VI and King Super 20 saxophones..... Cheers
 
FIRST POST EVER ..I've played on Level Airs for quite a number of years. The original stainless models can be split into two types. The pre and post Selmer buy out in 1966. The pre buy out Carlsbad pieces are undated and can have 4 or 5 digit serial numbers seemingly chosen at random. They have cross mill marks on the facing, a polished baffle, more refined bite plate, different lig screws and in my long experience are generally far better players than the dated post 66 Selmer faced models. They vary a lot in the tip openings and can even be 10 or more thou either way. I play a 9 ( 115) baritone , a 7* ( 108) tenor and 2 5* ( 79 and 81 altos). I have a couple of spare tenors for sale .. a 7 ( 95 original) and an 8 ( 105) refaced by Eric Greiffenhagen. I'm always looking for pre 66 altos in 5 and 6. I play these on VI and King Super 20 saxophones..... Cheers

Welcome Michael - good that you are hear on the Cafe forum. Are you still over on SOTW as well ?

Rhys
 
FIRST POST EVER ..I've played on Level Airs for quite a number of years. The original stainless models can be split into two types. The pre and post Selmer buy out in 1966. The pre buy out Carlsbad pieces are undated and can have 4 or 5 digit serial numbers seemingly chosen at random. They have cross mill marks on the facing, a polished baffle, more refined bite plate, different lig screws and in my long experience are generally far better players than the dated post 66 Selmer faced models. They vary a lot in the tip openings and can even be 10 or more thou either way. I play a 9 ( 115) baritone , a 7* ( 108) tenor and 2 5* ( 79 and 81 altos). I have a couple of spare tenors for sale .. a 7 ( 95 original) and an 8 ( 105) refaced by Eric Greiffenhagen. I'm always looking for pre 66 altos in 5 and 6. I play these on VI and King Super 20 saxophones..... Cheers
Hi Michael, welcome. Long-time no speak, how are you?
I adored my alto Level-Air. a 7* (refaced I think) 6 digit model I got from Phil Todd many years ago. Some years ago I realised that the facing was not optimal and was holding me back and I still haven't got around to having it sorted out 20 years later! I've been getting pieces from the estimable Ed Pillinger recently so I might ask him if he will work with stainless steel, but not everyone will, I know.
 
Hi Michael, welcome. Long-time no speak, how are you?
I adored my alto Level-Air. a 7* (refaced I think) 6 digit model I got from Phil Todd many years ago. Some years ago I realised that the facing was not optimal and was holding me back and I still haven't got around to having it sorted out 20 years later! I've been getting pieces from the estimable Ed Pillinger recently so I might ask him if he will work with stainless steel, but not everyone will, I know.
Hey Dave. Hope you're well in the times we find ourselves.
 
If I may revive this thread.... I've just gone back to my early model tenor Level Air (7), having discovered that I very much like the sound I'm getting from it with Java 2.5 reeds. I then wondered what synthetics might do the job. Messing about with what I've got I've tried Légère Classic 2.5, which I struggled to get any sound out of at all, Légère Studio 2.5 which gave quite a decent sound but was difficult for articulation, a Fibracell Premier 2, which was a bit too soft, and an older Fibracell medium soft, which was a little too hard. Any thoughts from the cognoscenti? Do I just keep buying green boxes of cane?
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,064
Messages
578,438
Members
8,130
Latest member
tommyliehe
Back
Top Bottom