Tech/maintenance Yanagisawa 900u tenor -correct order of disassembly

Does an order of disassembly exist? Clearly reassembly would be the reverse of disassembly.
Every maker is different. Study the sax and work in layers/sections. Take a ton of pictures. At minimum one each as you disassemble each part. Take notes! If a cork falls off note it !
here’s a thread I did recently for a friend on the exact same subject. Although it is a Conn 14M. This may give you some idea of the process. I didn’t detail it to death. If you haven’t done one before be prepared for scratches. Sometimes you can cover the areas with blue masking tape. And sometimes you better not. Depends on the lacquer / finish. Sometimes there’s a reaction between the adhesive and the coating.

 
You are correct that assembly is basically the reverse of disassembly. This is from a thread I started on SOTW. To read the post in its entirety go to: So Ya Wanna Learn Sax Repair

Disassembly Order It is a good idea to unhook springs before removing keys.
1. Palm keys D, F, Eb, high E, F#
2. Octave mechanism, thumb key
3. Side C, Bb, and levers
4. Upper stack, front F "rocker"
5. Low Bb, B, Low C#, G# touch
6. Low Eb, Low C, Low C# key
7. Lower stack, G# key, Fork F#
8. Key guards, clothes guard
 
Last edited:
Here's my standard procedure for a modern horn.

Palm keys
G key
Top F#, top E
Octave mech and thumb key
Top stack and Bis Bb
Front top F link key
Bell key guards, trouser guard and side F# guard (if detachable.
G# lever, low B, Bb
Low C# guard (if fitted), low C# cup key, low C# lever key.
Lower stack
Low C, low Eb
Side F#, top F# touchpiece
Side Bb and C key cups
Side C lever, side Bb lever
G# key
Check bell clamp and bell stay screws for tightness.

Reassembly is different - and this routine allows you to 'build' the regulation progressively.

G# cup key
Lower stack
Top F# touchpiece
Side F# and key guard
Side C lever, side Bb lever
Bis Bb
A key (set regulation between A and Bis Bb)
Top stack
Front top F link key
Octave mech and thumb key
G key
Palm keys
Side Bb/C cup keys
Low C/Eb and key guards
Low C# lever, low C# cup key (and guard if fitted)
Low B, low Bb and key guard(s)
G# lever key
Trouser guard

It can vary depending on preference or the design of the action, but in essence you strip down from the 'outside in' and reassemble from the 'inside out' - with the inside being a line drawn straight down the tops of the main body tube toneholes.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,077
Messages
578,685
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom