Saxophones Which alto?.....guidance please.

Just obtained a Rico Graftonite for my tenor. It`s an A7 and sounds very warm, big and clear as a bell using a medium `anymake` reed. Amazing value. I think players can get fixated on m/p`s and spend a lot of money fixing problems that first and foremost live within themselves. Make sure that you are fully in control of the instrument before throwing the cash around is my advice. (Says he who has spent many spondulicks in his career....good luck!)
 
Hi Paul
Couldn't agree more it's a bit like golf - you always want the newest overpriced super zoom giantest big eedjit driver on the market!
Regarding reeds I got totally fed up with buying packs of 10 to find a few that were any use and now use Fibracell exclusively.
Keep blowin
Alistair
 
I would just play the one that you feel most comfortable playing. Music is a comfort thing, and if you're not comfortable playing a certain one, then you will never be comfortable playing music on it.
I know, that helps alot =P

You're right. Trouble is - it's difficult to persuade yourself that a sub$20 mouthpiece can be any good, whether for your own performance, or for credibility amongst other players.

Much easier to justify playing a Rico Royal when you add 'Designed by Arnold Brilhart' into the sentence....

As an aside I dug out my Rico Royal B7 alto piece again. I've been working with a Selmer Soloist. The rico, frankly, shocked me. I thought the soloists were better, but it's not true, at least not on that sax. Looks as if it's back to the Rico and put the Selmers on Ebay...
 
Must be hard to accept that you are a sub $20 player, KevvyG .................... :shocked::w00t:;}

I have to say that my Rico B5 Alto is eclipsed by my Runyon 22 #7, in terms of my own playing - the extra Β£14 proved the difference!
 
Last edited by a moderator:
Must be hard to accept that you are a sub $20 player, KevvyG .................... :shocked::w00t:;}

I have to say that my Rico B5 Alto is eclipsed by my Runyon 22 #7, in terms of my own playing - the extra Β£14 proved the difference!

The problem is, what sounds good today in one venue, can sound quite different in another. Also, in six/twelve months time, things could well be reversed, due to the changes in ones' ability ;}
 
Just sitting back, thinking and blowing. I do like my YAS62; the ergonomics are superb, and it`s really well made- as good as anything else I`ve had. Just wondering whether the answer might be to keep it and start seeking my `smokey ballad` sound via mouthpieces and/or crooks. Nobody has mentioned the latter, but somewhere else within the forum I`ve read comments about other crooks such as the solid copper Barone replacement. Any comments?

If you still wish to experiment, a couple of mates of mine have tried the Yani crooks on their YAS62s with very good results, obviously the bronze one for a mellower/rounded sound... but you should really try them yourself! From what I can remember, they did not need to adjust the tenon on the Yani crook. Slight issue will be the short octave lever on the YAS, just take an inch of plastic/rubber tubing to sleeve over your octave lever when testing the crooks. For one of my mates I made a more permanent brass sleeve which you can then soft solder or superglue on, without making big mods to the original lever.
Hope this helps.
M.
 
Are you sponsored by Rico.........?

Not yet, but I'm working on it >:)

Seriously though, I have found this to be the case. I was only supposed to have one gig last week, but got roped in for another two. One was outside, at a restaurant with a very large garden (park?). The only m'piece that worked for me was my Berg 120 :shocked:

John.
 
It`s the way you wrote it Alaistair. If you were taller, the words would have been further up the page! How do you reach the mouthpiece, though? I`m quite tall and I get a bad crick bending down to play. Also the sound`s further away so I`m often behind the beat.
And it`s boring over the horizon.....there`s another one just the same!
 
It`s the way you wrote it Alaistair. If you were taller, the words would have been further up the page! How do you reach the mouthpiece, though? I`m quite tall and I get a bad crick bending down to play. Also the sound`s further away so I`m often behind the beat.
And it`s boring over the horizon.....there`s another one just the same!

That's the reason I gave up on the Baritone Paul - hauling around all the scaffolding was too much hassle but hey that's very comforting news about the horizon!
 
Must be hard to accept that you are a sub $20 player, KevvyG .................... :shocked::w00t:;}

I have to say that my Rico B5 Alto is eclipsed by my Runyon 22 #7, in terms of my own playing - the extra Β£14 proved the difference!

πŸ™‚))


Only on alto.

On tenor I have pieces to brag about, both in terms of cost and how good they sound (meaning I sound):sax::sax::sax:


Now what I need is an alto piece that does the same and has Street cred. Cheapo Runyon doesn't do it, I'm afraid. Must be something with a big french name that sounds as if it cost a fortune, and I really know what I'm talking about, then I can crow about how great it is and how clever I was not to be suckered into paying twice as much for a Xxxxxx (insert name of very overpriced brand)

:mrcool
 
The Rico Royal C7 Tenor which I got today is a very decent blow, indeed....................

I think that Runyon missed a trick when they were promoting mouthpieces in the UK. They could have developed a specialist soprano mouthpiece specifically for ballads and romantic pop (Cheesey Runyon) and a reflective, moody sounding tenor mouthpiece (Sage'n Runyon), as well as a bright alto piece specifically for high energy funk (Spring Runyon)!

I should have entered the commercial music sector much earlier in life .................:ashamed
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,074
Messages
578,628
Members
8,133
Latest member
walthang
Back
Top Bottom