Tech/maintenance STM Alto 6* - how to clean gunk off?

DavidUK

Well-Known Member
Messages
8,133
Location
Near Evesham, Worcestershire
20220701_182458.webp

20220701_182528.webp


I inherited this STM USA 6* Alto MP with a sax. It had a MP patch which I pulled off but that's as far as I got in cleaning it.

Usually I'd go at something like this with a white "Magic Sponge" but I'm aware these are gold plated, and it typically has some already missing from the table, so I wanted to treat it fairly gently in removing the built up crud. I think the bite plate will be OK once cleaned.

Any suggestions what to use to remove gunk not gold? Oh... and...

...from the STM chart this seems to be a bog standard STM USA (third from the right)...

Screen-Shot-2021-01-25-at-11.09.33-PM-980x735.webp



...so am I correct in thinking the "J J Babbitt" reference on the box is simply where it was purchased, as under...

20220701_182837.webp


Many thanks for any help.

🙂
 
I don't know if you can get "Goo Gone" in the UK, but I have found that very effective in removing sticky residue without harming the underlying finish. The company that I get my gold plating solution and supplies from recommends a paste of baking soda and a soft cloth to clean and polish gold plating. I have use that technique followed by rubbing with a Connosieurs Gold Polish Cloth to restore a gold finish. As long as you don't use harsh or abrasive cleaners or polishes, the gold plating should hold up just fine.

gold polish cloth.webp
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,077
Messages
578,685
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom