kevgermany
ex Landrover Nut
- Messages
- 19,857
- Location
- Just north of Munich
In my collection, I have a tenor piece by Selmer, not the usual French made, but one made in England... There's very little on the web about them. What there is suggests they weren't interesting to play (I'm pretty sure Mr Wyver would describe this as the dullest piece he's played).
I was discussing it by PC recently with another member and was asked for a few pics. The mouthpiece is nice, big, dark warm sound, not loud, but almost homely. Suits me.
It's gold plated brass, seems to have the gold straight on the brass, which means that over time the brass will migrate into the gold, affecting the colour/finish. Unlike links, which have layers of plating under the brass, and when the thin gold goes, they turn white/silver.
Something came up in the discussion about the beak construction, which I hadn't noticed before. The roof of the chamber is soldered on to the side rails and body. Also it looks as if the shank is soldered to the body. My guess is that it was cast in parts, put in a jig, then soldered together. You can see this in the side shots, where I've upped the brightness and contrast on the pics, the red arrows show the joins on the outside. Also the small solder bubbles in the roof/rail joint. This is barely visible normally and I think would have been invisible when new, but the plating has worn thin and it's showing through now. Also there's a small step baffle where the body and beak are soldered. The side rails are undercut - but not by filing out, this was cast in.
Lig is interesting and I oringially thought it was a bit dodgy/broken. There's a captive thumb screw, but the thread it screws into isn't where you'd expect it, it's in the loose collar that's sitting on the pressure plate. Means that it tightens nicely, but if you try to overtighten, the collar turns and it doesn't jam/strip the thread. Not much plating left on it, sadly, and you can see where it was soldered on the back.
So - an interesting curiosity - and not very common.
I was discussing it by PC recently with another member and was asked for a few pics. The mouthpiece is nice, big, dark warm sound, not loud, but almost homely. Suits me.
It's gold plated brass, seems to have the gold straight on the brass, which means that over time the brass will migrate into the gold, affecting the colour/finish. Unlike links, which have layers of plating under the brass, and when the thin gold goes, they turn white/silver.
Something came up in the discussion about the beak construction, which I hadn't noticed before. The roof of the chamber is soldered on to the side rails and body. Also it looks as if the shank is soldered to the body. My guess is that it was cast in parts, put in a jig, then soldered together. You can see this in the side shots, where I've upped the brightness and contrast on the pics, the red arrows show the joins on the outside. Also the small solder bubbles in the roof/rail joint. This is barely visible normally and I think would have been invisible when new, but the plating has worn thin and it's showing through now. Also there's a small step baffle where the body and beak are soldered. The side rails are undercut - but not by filing out, this was cast in.
Lig is interesting and I oringially thought it was a bit dodgy/broken. There's a captive thumb screw, but the thread it screws into isn't where you'd expect it, it's in the loose collar that's sitting on the pressure plate. Means that it tightens nicely, but if you try to overtighten, the collar turns and it doesn't jam/strip the thread. Not much plating left on it, sadly, and you can see where it was soldered on the back.
So - an interesting curiosity - and not very common.
Last edited by a moderator:
