Saxophones Restore old Conn USA 16M Tenor or purchase new?

e_lateralus

New Member
Messages
3
Location
Baton Rouge, La
I bought a used Selmer Alto a while back to sort of re-introduce myself to playing after taking such a long break of nearly twenty years. While that has gone well, I really want to get back into playing tenor as I just prefer the sound. Well I have my Conn 16M Tenor, which I believe was made in 1966. But since I have not played it since high school, it is in need of a complete overhaul, $650-$750. Since I can get a Jean Paul student tenor for maybe $50-100 more, I would like to know what your opinion on the matter is. Should I go ahead and restore my old sax with all of the nostalgia it brings (plus it always played well back then) or would it be smarter to just pay that extra bit and get a brand new one? As much as I adore my Conn, I am a little concerned that the restoration may be only OK and won't play as well as it used to, thus not as well as a brand new one. Any thoughts will be greatly appreciated. Thanks!
 
Not familiar with the 16M but I would expect the Conn to hold some value, where as student horns can depreciate quickly.

A quick search suggests it's similar to the 10M sound wise, with some changes to the key work, the 10M isn't a student horn with many pro's using them.
 
Restore, I don't know if that is a good idea? Make your Conn 16M playable again. Maybe just needs a service and some new pads, corks, felts ...... . "Restore" is for me a bigger job.
 
Restore, I don't know if that is a good idea? Make your Conn 16M playable again. Maybe just needs a service and some new pads, corks, felts ...... . "Restore" is for me a bigger job.
Agree, have you tried playing it? Might be worth running it past a tech, or a local player and see what they make of it, might just need some adjustment. My NW alto isn't the prettiest to look at, but plays brilliantly.
 
A good used 16M over here can sometimes be bought for £250, as can a Jean Paul student tenor.
Be careful with what dollars you're putting into each of your ideas.
Put £250 into the Conn to get it playing and you may get it back if you then sell. Spend £700 on a top line overhaul on it and you'll probably still get £250 back.
Put £700 into a new Jean Paul and you'll perhaps get £250 back if you sell later.
Best to see how little you can spend on the Conn... you know it can play well for you.
 
Well, a Conn 16M is a horn that sounds just like a Conn. No new horn sounds like that.

Why do you think you need "a full overhaul" (which would cost quite a bit more than $600) rather than a playing-condition service - replace a few pads, some corks and felts, oil the keywork, and adjustments? I bet you need $100-200 worth of work.

A "Jean Paul" is yet another essentially fungible Far East-made copy of a Selmer Super Action 80 sax, made to the very lowest cost possible. There are dozens of these brand names with quality ranging from decent to horrible. I think the Jean Paul brand is imported by a company that maintains a reasonable degree of QC.

Since current market value for a 50 year old Conn Director in playing condition is not much lower than the current market value for a brand new Jean Paul, that in itself ought to tell you something.

What a 16M is, is a 10M tube with New Wonder II keywork. By all accounts the assembly quality declined over the years they were made, but at this point the treatment it's had over the 50-70 years of its life is far more important than its initial build quality.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,064
Messages
578,438
Members
8,130
Latest member
tommyliehe
Back
Top Bottom