Tech/maintenance Removing stuck pivot screws from posts

saxmad

Member
Messages
110
Location
North Norfolk
I'm stripping down a Yanagisawa 900u tenor and numerous pivot screws are impossible to remove. The screw slots are fine and it appears that Yanagisawa possibly use a thread locker as they are ridiculously fast. One solution is to apply heat to the post after penetrating fluid has been applied but other suggestions would be welcomed.

This is the second Yanagisawa I have worked on and they both appear to have poor quality initial set ups - the first one had pads that weren't properly seating, and that was brand new!
 
I have a stupid question. If you’re trying to extract a hinge rod you’re heating the opposite end. The post on the other end with the threads? On pivot screws I have a luck heating more directly on the head itself.
like Steve mentions. Penetrant has no effect on thread lockers.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,076
Messages
578,679
Members
8,134
Latest member
banjo
Back
Top Bottom