Reeds reed softness

Aha, just saw this answer posed while I was writing mine. This seems to contradict me, and I bow down to your greater knowledge and experience:

although not being asked to me, I use decent quality 800 then 1200 followed by 2000.
Yes overkill - & sanding flat/square, agree totally!
 
hmmm... not a contradiction, just a different (slower) method, and as for greater knowledge you seem to have missed the winking jokey icon - let us not forget all my efforts went onto a proper facer!!!!!

To avoid clogging, just use a film of water.... with a tiny drop of washing up liquid.

Aha, just saw this answer posed while I was writing mine. This seems to contradict me, and I bow down to your greater knowledge and experience:
 
Thanks john
No probs,....... Im a tradie so I know what to do
many punters possibly think they might,too, and then stuff it up .
I will take care.! but as its only a cheap mp Im happy to give it a go.
It only needs a couple of thou, its not much, but enough to cause leakage
and possible sound issues.
Im interested to see what a difference it will make.
 
One thing to watch is that as reeds get wet, they swell, and often end up convex where they meet the table, another cause of what you're describing. Should have mentioned it before, but as you'd checked the mouthpiece, I didn't. One book recommends sanding the base of the wet reeds lightly to remove this convexity.
 
I say to everyone :-
The business of preparing reeds is like everything else. If you don't try the methods proposed, you can't really comment on them.
It really is a case of suck (blow in our case) it and see. It doesn't cost much!
"Experimentation is the mother of invention" ;}

John.
 
There was a thread some time back, where someone with a particularly, shall we say wet mouth, wanted to know if there was anything that could be done to stop the reed becoming waterlogged. So I thought about it, and came up with the idea of sealing the fibres by rubbing a SMALL! amount of plastic adhesive into both sides of the reed. I emphasize small, because after application, you can only just see a slight sheen on the surfaces. The result proved very satisfactory, no moisture in the reed, and (to me) no tonal difference, and apparently no toxicity (I'm still here :thumb:) I've been using that reed now for about eight months.
Yes I did adjust the reed to suit the mouthpiece first ;}

John.

Hi John

An old thread I know but I'm finding my reeds are getting too wet and I'm thinking to try your idea. I just wonder what glue you are using, is it just a PVA..


Thanks

Martin
 
A reed that gets waterlogged will be slower to respond due to the increase in mass, and if not correctly shaped (adjusted) to allow for the swelling will usually develop a healthy transverse warp. If a lig is very tight the swelling of the cane is powerful enough to distort the mpce table in parts.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,077
Messages
578,686
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom