Saxophones Problem with new Yamaha YAS62

Hey guys! I fixed it (I think...for now). It WAS a bent crook key as all of you said.

First, I gently pushed the octave key pad into the pip. I kind of just massaged it in to see if it will close better. That in itself fixed most of the squeaking notes except the D played with octave key.

I then looked to see if there was any space between the ring and the octave key post. I couldn’t tell if there was any space with my naked eyes. They looked like they were touching. To compare, I put my YAS 26 neck on and that clearly had space between the ring and post. So it was pretty clear that the 62 ring is smaller than the 26 ring. The 62 ring doesn’t have much space for the post.

I then played A, B flat, C, D with octave key pressed. I saw that when I played the D, the octave key pad moved a bit. It was just a tiny movement. So I used the method suggested in @Stephen Howard’s article, stuck my thumb in the ring and bent the key pad inwards. And voila! Fixed!!!

OMG, I am so happy, guys. You all are amazing! I wouldn’t have been able to have done it without your help!

I will continue to play the sax up and down over the next couple of days to make sure everything continues to play properly and my fingers are crossed that it does.

:thanks1::thanks3:
That issue with the bent neck octave key is common among new players. Be aware of how delicate the key is, and take care when assembling the horn.

Enjoy!
 
That issue with the bent neck octave key is common among new players. Be aware of how delicate the key is, and take care when assembling the horn.

Enjoy!
Thanks!

I’ve been playing on the student level YAS26 for over a year and haven’t had a problem. Somehow, I feel that the 62 is more “delicate”? In terms of materials and clearance for things. When I handle the 2 necks, it seems the material in the 26 seems to be “harder” and the 62 “softer”. These are just observations and feelings, but I have no idea if they’re correct. Maybe others can chime in on that.

All I know is I’ll be more careful from now on! And I wonder if I should’ve just bought a student Yamaha instead, because of its ruggedness. I admit I can be a bit clumsy at times. :doh:
 
Thanks!

I’ve been playing on the student level YAS26 for over a year and haven’t had a problem. Somehow, I feel that the 62 is more “delicate”? In terms of materials and clearance for things. When I handle the 2 necks, it seems the material in the 26 seems to be “harder” and the 62 “softer”. These are just observations and feelings, but I have no idea if they’re correct. Maybe others can chime in on that.

All I know is I’ll be more careful from now on! And I wonder if I should’ve just bought a student Yamaha instead, because of its ruggedness. I admit I can be a bit clumsy at times. :doh:

I have a YTS-62, and it doesn’t seem to be any more delicate than other saxophones I have tried. Just about all saxophones are surprisingly fragile.
 
Some neck rings don't form a concentric circle with the neck tenon and don't work properly unless the neck is turned to the correct orientation. Sometimes it is due to a bent key. The post that extends from the saxophone can get bent by "cranking" the neck back and forth when inserting it into the sax or by failing to use an end plug every time. Yamaha has solved part of the problem by designing the octave mechanism on many of its models so the post doesn't extend past the receiver.
 
Some neck rings don't form a concentric circle with the neck tenon and don't work properly unless the neck is turned to the correct orientation. Sometimes it is due to a bent key. The post that extends from the saxophone can get bent by "cranking" the neck back and forth when inserting it into the sax or by failing to use an end plug every time. Yamaha has solved part of the problem by designing the octave mechanism on many of its models so the post doesn't extend past the receiver.
Thanks, I will be careful with that post.

I went to compare the 62 with the 26. The post on the 62 is about 1 cm beyond the receiver whereas the post on the 26 is just a couple mm beyond. I never used the plug with the 26 (didn’t feel the need to) but know I’ll need to use it with the 62 for sure, seeing how much more it sticks out.

I’m going to start a new thread asking for case recommendations here: Accessories - Hard case for Yamaha 62
 
Last edited:
I've run into this problem as well. Didn't matter what neck or mouthpiece I had on the horn it was playing WAY out of tune. Running VERY flat. I couldn't push the mouthpiece in far enough, adjust my embouchure, I changed reeds, necks, mouthpieces, and still everything way VERY flat. Thank you for this. I was going mad!!
 
I've run into this problem as well. Didn't matter what neck or mouthpiece I had on the horn it was playing WAY out of tune. Running VERY flat. I couldn't push the mouthpiece in far enough, adjust my embouchure, I changed reeds, necks, mouthpieces, and still everything way VERY flat. Thank you for this. I was going mad!!
Which problem? Please quote the message that you are responding to or use more words.
 
I've run into this problem as well. Didn't matter what neck or mouthpiece I had on the horn it was playing WAY out of tune.
If there are intonation issues I would not mess with different necks for a start. Use the one that came with, and designed for, the horn.

The YAS62 is the last saxophone to have intonation or tuning issues. And it’s also quite mouthpiece friendly so I wouldn’t blame the horn.
 
I've run into this problem as well. Didn't matter what neck or mouthpiece I had on the horn it was playing WAY out of tune. Running VERY flat. I couldn't push the mouthpiece in far enough, adjust my embouchure, I changed reeds, necks, mouthpieces, and still everything way VERY flat. Thank you for this. I was going mad!!
@DesertRoads I am still curious to learn which problem you are citing. Do you need a solution to a remaining issue?
 
Seems to be about tuning. The latest thing I’d expect with a YAS62.
If so, then the next question is "What prevents the mouthpiece from going on far enough?" to which the solution is usually "Sand your cork to fit your mouthpiece properly". It could be something else, but @DesertRoads needs to provide better clues.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,057
Messages
578,207
Members
8,127
Latest member
PJ2116
Back
Top Bottom