Saxophones Pork Tales: Saxophone Repair DIY Adventures.

Life around the barn.
Tales from a pig that likes to stick his nose into everything.

Paint that S. How difficult could it be ?
1747869014621.webp


1) Search the net.
2) Find the color.
3) Order color.
4) Study task on University of YouTube, aka; For destruction by DYI presented by pro tech.
1747869824677.webp



1747869909688.webp


Do the cleaning & prep.
1747870236970.webp


Paint and cleanup / detail the edges with hard cotton swabs. Sounds easy……:confused:
1747870401847.webp


Yeah tha guy Matt makes it look easy.
Anyone remember your first experience cooking bacon crispy while still in the frying pan !
 
Oooohhh - I am giving my kids some ****e to deal with when I'm dead.

Regarding the magnet - most of them that I can find here at about 100kg pull are round with a central hole. I imagine I'll need a soft former on the outside - something roughly formed to the shape of the tube in the patch where I am, with something soft inside it? I don't have a feel for how the inv sq law is going to work against me.

(ETA - your mention of odd-to-me US thread specs made me grimace, as I was earlier in the week sorting through boxes and boxes of assorted junk trying to find some UNF (or UNC, I can't remember) to clamp up the spring in an old Bridgeport CVT motor pulley. Which, after about an hour, it transpired someone had already re-tapped to M6 🙂 )
 
Oooohhh - I am giving my kids some ****e to deal with when I'm dead.
My daughter will probably sell the house along with the contents. That’s if Ma Squealer doesn’t call the scrapman first.
Regarding the magnet - most of them that I can find here at about 100kg pull are round with a central hole. I imagine I'll need a soft former on the outside - something roughly formed to the shape of the tube in the patch where I am, with something soft inside it? I don't have a feel for how the inv sq law is going to work against me.
Good thread on the subject.
(ETA - your mention of odd-to-me US thread specs made me grimace, as I was earlier in the week sorting through boxes and boxes of assorted junk trying to find some UNF (or UNC, I can't remember) to clamp up the spring in an old Bridgeport CVT motor pulley. Which, after about an hour, it transpired someone had already re-tapped to M6 🙂 )
🤪 assorted junk 🤣 Yeah until the rainy day you need it to save your bacon. That bit was likely 1/4-20 NC, UNC or 1/4”-28 NF, UNF. Close to 6mm. Work on a 1969 Triumph TR6R motorcycle for a year. You’ll learn all three hardware choices.
 
Drawbar for the collet chucks in the works.
View attachment 38826
Done 🙂
It’s solid bar stock so I’ve double nutted the bar for removing once set in if needed.
3/4”-10 TPI and first threads I’ve cut since getting the gearbox back in.
1795160182048.webp

1795160220242.webp

To our non-mechanical members. The tool is a taper press fit to secure. The bar when tightening secures the tool from coming loose.
1795160272438.webp

1795160413934.webp

1795161188608.webp
 
Done 🙂
It’s solid bar stock so I’ve double nutted the bar for removing once set in if needed.
3/4”-10 TPI and first threads I’ve cut since getting the gearbox back in.
View attachment 38848
View attachment 38849
To our non-mechanical members. The tool is a taper press fit to secure. The bar when tightening secures the tool from coming loose.
View attachment 38850
View attachment 38851
View attachment 38852
Go on, put a big fancy handwheel on the end of it. I'd post one to you but it would mean cancelling Christmas 🙂

I was just working on a big cast-iron mechanical hacksaw, the same age as your Triumph. I thought it was much older, because everything that would now be a light steel pressing / fabrication is cast iron - eg some really fancy castings for the coolant sump and pump, all in one, all very thin - they must really have needed to keep the foundry busy. Someone at work wanted to condemn it because the motor bearings (it appears to be the original motor) were noisy (!) - and they turned out to be metric and therefore cheaply replaceable. I wonder when Triumph went to metric bearings - English bearings here are paradoxically often only available from the US, and the price of postage, as already alluded, is ruinous.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,075
Messages
578,660
Members
8,134
Latest member
banjo
Back
Top Bottom