Saxophones Pork Tales: Saxophone Repair DIY Adventures.

Life around the barn.
Tales from a pig that likes to stick his nose into everything.

Paint that S. How difficult could it be ?
1747869014621.webp


1) Search the net.
2) Find the color.
3) Order color.
4) Study task on University of YouTube, aka; For destruction by DYI presented by pro tech.
1747869824677.webp



1747869909688.webp


Do the cleaning & prep.
1747870236970.webp


Paint and cleanup / detail the edges with hard cotton swabs. Sounds easy……:confused:
1747870401847.webp


Yeah tha guy Matt makes it look easy.
Anyone remember your first experience cooking bacon crispy while still in the frying pan !
 
Oooohhh - I am giving my kids some ****e to deal with when I'm dead.

Regarding the magnet - most of them that I can find here at about 100kg pull are round with a central hole. I imagine I'll need a soft former on the outside - something roughly formed to the shape of the tube in the patch where I am, with something soft inside it? I don't have a feel for how the inv sq law is going to work against me.

(ETA - your mention of odd-to-me US thread specs made me grimace, as I was earlier in the week sorting through boxes and boxes of assorted junk trying to find some UNF (or UNC, I can't remember) to clamp up the spring in an old Bridgeport CVT motor pulley. Which, after about an hour, it transpired someone had already re-tapped to M6 🙂 )
 
Oooohhh - I am giving my kids some ****e to deal with when I'm dead.
My daughter will probably sell the house along with the contents. That’s if Ma Squealer doesn’t call the scrapman first.
Regarding the magnet - most of them that I can find here at about 100kg pull are round with a central hole. I imagine I'll need a soft former on the outside - something roughly formed to the shape of the tube in the patch where I am, with something soft inside it? I don't have a feel for how the inv sq law is going to work against me.
Good thread on the subject.
(ETA - your mention of odd-to-me US thread specs made me grimace, as I was earlier in the week sorting through boxes and boxes of assorted junk trying to find some UNF (or UNC, I can't remember) to clamp up the spring in an old Bridgeport CVT motor pulley. Which, after about an hour, it transpired someone had already re-tapped to M6 🙂 )
🤪 assorted junk 🤣 Yeah until the rainy day you need it to save your bacon. That bit was likely 1/4-20 NC, UNC or 1/4”-28 NF, UNF. Close to 6mm. Work on a 1969 Triumph TR6R motorcycle for a year. You’ll learn all three hardware choices.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,064
Messages
578,459
Members
8,130
Latest member
tommyliehe
Back
Top Bottom