Saxophones Pork Tales: Saxophone Repair DIY Adventures.

Life around the barn.
Tales from a pig that likes to stick his nose into everything.

Paint that S. How difficult could it be ?
1747869014621.webp


1) Search the net.
2) Find the color.
3) Order color.
4) Study task on University of YouTube, aka; For destruction by DYI presented by pro tech.
1747869824677.webp



1747869909688.webp


Do the cleaning & prep.
1747870236970.webp


Paint and cleanup / detail the edges with hard cotton swabs. Sounds easy……:confused:
1747870401847.webp


Yeah tha guy Matt makes it look easy.
Anyone remember your first experience cooking bacon crispy while still in the frying pan !
 
That's me. I glue a piece of nerf dart over the little dowel to take up the space.

View attachment 36922
Question 🙋
I haven’t seen one of these in person, so ?
1)Are the dowels long and need to be shortened ?
2) Are the dowels small in diameter ? The need for air dart or other appropriate larger coverings ?
3) I see you’ve painted the stand black. With what ?
I ask about the paint because reaction or incompatibility issues can happen. The sticky surface issue. It sucks when things melt or stick together after a while.
The reason I used velvet and left my wood dowels natural/ untreated.
 
I guess you have one to use as a pattern...got a form-tool for turning little balls?
Yes and yes.
(Here's me talking - down looking after Dad, gas bits all arrived, still haven't lit it and seen what happens!).
Do the recommended leak tests the disclaimer instructions it comes with !
Heck, stick the wand in a bucket of water and turn the pressure on. See if you get bubbles at minimum!
I did after the suds test. Then check each tip attachment every time used. A small safety measure at minimum 😉

Forty five + years of fooling around with pressurized gas containers and “approved” attachments. I’ve seen some “stuff that happens”.
 
Question 🙋
I haven’t seen one of these in person, so ?
1)Are the dowels long and need to be shortened ?
2) Are the dowels small in diameter ? The need for air dart or other appropriate larger coverings ?
3) I see you’ve painted the stand black. With what ?
I ask about the paint because reaction or incompatibility issues can happen. The sticky surface issue. It sucks when things melt or stick together after a while.
The reason I used velvet and left my wood dowels natural/ untreated.
1) The dowels themselves are about 1.75" long. The little rubber cap on the dart adds about 1/2" to the height. Sop pieces hover half way up the peg but everything else rest on the little shelf.

2) The dowels are only 1/8". When my son was little these darts were all over the house. I discovered that the hole through the center of the dart coincidentally fits perfectly over the dowel and prevents scratching the mpc. Bari pieces fit a bit loosely in the shank but everything else fits fine.

3) The black paint is from a rattle can of Rustoleum epoxy appliance enamel that I had sitting around. It sits in my man cave/music room where it's 72F/~50%RH. That rack is only about 3 years old but no problems with the finish yet.
 
A quick fix soldering job.

I scraped clean the top inside and end. Masked off with some whiteout tape. Added flux.
I did a quick bench top test on the tape first. Will it stick to metal ? Yes. Will it burn ? No. After heat can it be removed? Yes. The 13mm test strip was was informative.
1788636989933.webp


End cap has a little shoulder. Cleaned well. Soldering flux added. Then I made a fine wire ring of solder and stuck to shoulder with flux.
1788637522426.webp

1788637571476.webp


Heated on & off all the way around until the solder flowed. Then a light press on end while still flowing. The part moved right to position.
1788637965003.webp

1788637998759.webp
 
No high F#!?! Is the tonehole "sealed".
This tenor has largely lived in a recording studio. No beauty queen. Mechanically rock solid. It’s in for solder cleanup. New cloth guards. New receiver ( to accommodate multiple crooks) and a full repad.
The wings were gone 65 years ago. A 1958 model that has been well enjoyed, maintained and adapted to different player’s needs. Oddly there’s zero damage. Not one dent or sign of damage repair. Needs one new small hinge. The action is perfect. Can’t say this for 90% of the Selmers I see. Those hold the record for the most abused & neglected saxophones on the planet.
1788733398439.webp

1788733967557.webp

1788734083319.webp
 
I'll be interested to see how you remove excess solder from a silver plate instrument. Asking for a friend
🙂

(What little electronics background I have suggests a spring-loaded sucker or copper braid, both of which I have and neither of which I can imagine being useful in this context.)
 
I'll be interested to see how you remove excess solder from a silver plate instrument. Asking for a friend
🙂

(What little electronics background I have suggests a spring-loaded sucker or copper braid, both of which I have and neither of which I can imagine being useful in this context.)
I will be attempting with three different methods. The reciever will be test subject.
Clean the area with baking soda and water. Neutralize any remaining acid in the area.
Stab heat on & off, wipe/ brush to remove.
Wick off with copper braid.
Wick off with charcoal.
Burnish with 0000 wire wool. Final with red jewelers rouge on cotton by hand.
 
I am putting some popcorn in the microwave this will be a good show!
One microwave bag🤣. This one’s going to be several 7L 8/qt buckets worth:popcorn:
No shortage solder removal practice on this here.
The original Wings long gone…
1788833590595.webp

were replaced with these. The second location of soldering.
1788833664240.webp


So the task is to remove everything and start over….
1788833477408.webp


with new covers that I’m waiting for the customer to drop off the bumpers for.
1788834358871.webp


The old bumpers were the wrong threads.
1788834795158.webp


That’s just on the four covers. The the one on back of lower stack.
1788835270810.webp


That still leaves cleanup at strap ring. Where posts/ keywork was removed. And possibly removing the high F Tonehole. Then I can machine & fit the receiver.
 
Wow, big job! I'm looking forward to following the action. I rather like the current key guards - they look a lot more Teutonic (in fact they remind me of something aiming to protect one from the hot bits of some machine, or engine!) than the plastic angel wings which are perhaps suggestive of a product of an Italian accordion manufacturer 😎. How did they ever permit the series production of something so clearly (ahem) funktionsunfähig?
 
Wow, big job! I'm looking forward to following the action. I rather like the current key guards - they look a lot more Teutonic (in fact they remind me of something aiming to protect one from the hot bits of some machine, or engine!) than the plastic angel wings which are perhaps suggestive of a product of an Italian accordion manufacturer 😎. How did they ever permit the series production of something so clearly (ahem) funktionsunfähig?
Big job ? Not out of the usual around here. More the norm than not. Lots of great horns around that need this kind of TLC (tender loving care).
The acrylic wings were quite something when first introduced. Both in materials and design.
Enough to used for the 100th anniversary edition.

The sheet metal coming off looks a bit odd. I agree they look more fitting as an heat shield on a motorbike.

The owner is a pro player and member here on the Café. I did inquire about his interest in changing them.
“Aesthetics” was the answer. He didn’t care for the original look. The existing are fugly and new vintage JK are not eye pleasing either. So ! Here we go.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,064
Messages
578,440
Members
8,130
Latest member
tommyliehe
Back
Top Bottom