Saxophones Pork Tales: Saxophone Repair DIY Adventures.

Life around the barn.
Tales from a pig that likes to stick his nose into everything.

Paint that S. How difficult could it be ?
1747869014621.webp


1) Search the net.
2) Find the color.
3) Order color.
4) Study task on University of YouTube, aka; For destruction by DYI presented by pro tech.
1747869824677.webp



1747869909688.webp


Do the cleaning & prep.
1747870236970.webp


Paint and cleanup / detail the edges with hard cotton swabs. Sounds easy……:confused:
1747870401847.webp


Yeah tha guy Matt makes it look easy.
Anyone remember your first experience cooking bacon crispy while still in the frying pan !
 
As more parts are removed more of the needle springs are exposed. I handle the unit by the bell only. Don’t pet the cactus 🌵.

If at any time a bent part is discovered. Don’t be tempted to straighten it out. That’s making an adjustment. The part is bent for a reason. Bent from damage is entirely different. That fix is not part or recommended for a DIY oil change.

Next section I remove is the octave system.
1781117977362.webp

Good time to remove the reciever thumb screws too.

Note; the octave touch arm pivot screws are often a different size. Loosening the lower one adjacent to LH thumb rest can challenging.
1781118088197.webp

Keep track of the parts orientation. One face of the sea-saw has marking. If not make one.
1781118194908.webp


When cleaning this assembly be attentive to the minuscule cork attached.
1781118651207.webp


I remove these next.
1781118811817.webp


LH palm key group, I usually remove last or after the upper stack. Reason being is access to extract the hinge rods.
No need to remove all the cloth guards. Just the one on lower stack below.
1781119179247.webp
 
Review the RH side palm and extra (up to four) keys. Side ? & high F or E whatever 🤪 look if they are not captive by G or anything at top. If not remove them but not the side C & Bb touch arms yet.
1781146589369.webp

Next section. Be advised that the sequence of Bb/Bis & upper stack can be reversed. Depends if cup of Bb will extract easily from under “A” touch.
First remove this cover. No need to completely remove the screw.
1781147764634.webp


1781146563760.webp

You should have a group of keywork like this on your bench.
1781147400026.webp


Proceeded to removing G# key.
1781147537654.webp


Lower stack is next. Pay attention to key feet F, E & D and the way located under F# backbar !
Tip; Draw the hinge rod out slowly and remove one key at a time. View how it comes out. This will aid your ability to reassemble.
Be attentive of the needle springs. This group has the potential of pad damage from pointy springs.
1781148798240.webp
 
look if they are not captive by G or anything at top.
To define a captive key you only need to look with judgement. Nothing worse than installing the upper stack only discover the need to take it apart again 😤
Red is held captive.
Yellow maybe.
Green nope.
1781151160276.webp

1781151208211.webp

1781151239924.webp

1781151282385.webp

1781151325795.webp


This assembly fabrication method is not limited to any one maker. Nor is this consistent from year to year.
These Martinis below as an example.
1781151578975.webp
 
Good time to dismantle the LH palm keys.
1781161053929.webp


Review the Quick F fork link. Some models the hinge rod of F link locks the palm E.
1781161243500.webp


Last step on disassembly. The side C & Bb touch arms.
This area on many makes can be a world class woodblock puzzle. The very reason they are often sloppy loose. Big PIA to service so techs just leave them on. Wash the body and squirt some oil in there.

Plan on zero clearance between the body and spring cleat. You may not be able to detach or attach the springs as fully installed.
The Bb is often held captive by C….but Bb needs to be loose to access the pivot screw in lower pillar on C.
1781161553422.webp


Don’t be surprised if Bb ends in position like this to extract C pivot.
1781162312823.webp
 
The recent Ball included 20 hours of polishing on one of my own. A 1922 J.W. York & Sons C Melody. These were solid black with tarnishing.
1783070636051.webp

Nothing top secret in cleaning. Note the basic tools and cleaning supplies to right.
1783070810768.webp

My usual everyday arsenal. (Do note that elbow grease is not pictured).
1783071133142.webp

Twenty hours of work. Gently cleaning without power tools. I don’t use power buffing tools.
1783071590189.webp


Aged or previously worked with chemicals (acids) keywork can have blistering issues. Buffing with power wheels and abrasives will remove the blisters and leave pits. Choose your evil !. I polish, oil to mitigate / block oxygen.
You can always clean till the cows come home….. choose wisely !!
1783072458467.webp
 
All in a day’s work….with no pay. Just personal satisfaction. Sometimes value is personal and priceless.
1783073008237.webp


Just need to polish the body now….another eight hours should do🙄
1783073231948.webp


I find the silver plating different between the keys and body on this York. Like the bass metal brass was plated using different applications. Can’t put my finger on it yet. Like keys were plated with copper then silver. Body is like 2X silver only. They polish and feel differently…. Small odd stuff.
1783073814803.webp
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,064
Messages
578,449
Members
8,130
Latest member
tommyliehe
Back
Top Bottom