Yes, they have been out for a while now. I never bought any because I don't really buy/sell accessories other than to accompany horn sales. The clearances are too small (in the retail space, but...in a way also in the boutique space except for a relatively few people in refacing/design) to justify the labor and headaches (pieces come back damaged all the time, and nobody ever believes they caused the damage -- very unpleasant dynamic to have to confront over & over).
I finally did get a couple recently, because I've got some new projects & because I have more mouthpiece needs personally than I've had for a long time. Related, I have a bunch of notes that may be useful to a variety of people (refacers, dealers, players).
The easiest thing to do, as long as (I guess?) this may serve to be an info thread for these pieces, is just get started, and let context come in later (if you let me, context will take over completely, because I'm usually more interested in context than what sits within it)....
This is just a jumping off point: initial statements to get going:
- I bought two hard rubber tenor pieces, one a 7* and one an 8* from the legitimate pipeline. They're not counterfeits unless my supplier -- one of the majors -- has gone way off the deep end during the pandemo. That's not impossible, but it's highly unlikely. To me, the other outcomes make it also unlikely, because actually if these were counterfeits they probably would be finished better, ironically, given what is actually wrong with them physically.
- I should add, right away, directly after saying that, so that the takeaway matches the reality, that despite looking terrible the pieces play pretty well (more on this later, details and minutiae). They are much better than the post-90s tenor HR Links to play.
- That said, these pieces look (physically look, at a superficial glance without tools), to anybody who knows how to reface and/or rework pieces, really really bad. The baffle in both seems probably to be from the same casting/blank as it is pronouncedly skewed. This should work, long term...I actually don't have one of the pieces now, and I think I erased the original photos I took, before starting to play around with them:
P.T. on Instagram: "A couple of additional details of the "Vintage" Otto Link, straight from the box, taken with effort to depict accurately. In the interest of avoiding misunderstandings, I'll try not to comment other than to say that after taking the photos I ran the table over sandpaper to see what color it came off. It came off gold/green, like one would hope, though to me the heft feela lighter than expected. I figure there are some out there, like me, who have beem curious about these without yet actually seeing one "in the wild" as one might expect it to be, buying blind."
^ some photo documention of the 8* before doing anything to it. I think I *might* have run the facing over 800 sandpaper, lightly, one time, to see what color it came off (it came off gold/green). I don't remember what piece I did that to, though I think I wrote that I did it to the 7* -- that might actually have been the 8*, I'm not 100% sure.
BUT, you can see right away how much higher the right side of the baffle is than the left. It's not subtle. The baffle is greatly higher on the right than the left (table facing up), and the same holds for the 7*, though on the 7* the left side was a little less low, i.e. at a glance it looked more even, because the left side was higher with a sort of symmetrical pinched corner as in the right side of the 8*'s baffle. There was almost a point at the outside corner of the 8*'s baffle at the transition of the rollover, and a similar but more symmetrical (side compared to opposite side) pinched area on both sides of the 7*'s baffle. Weird. I don't remember seeing an area like that -- almost a pinched point -- inside the baffle of any pieces, but I am looking at pieces much more closely these days than in the past. I guess it could be thought of as a sort of transition to a step-baffle that is/isn't there, in a way, but it is a strange feature. Anyway, once I had worked on both pieces, it was plain that the high area on the right was overall present in both pieces. This is relevant as far as notes to both players who may seek to have these pieces refaced, as well as potentially for refacers who are asked to rework these pieces but who may not have done that yet.
In advance: my overall note (as a noob) is to highlight that my finding was that where I took the high spot down further (I left the unevenness uneven, to a degree, in the 7*, but took it down in the 8*) -- and this will surprise no experienced refacers, I think, because it's the result you would expect for a noob, given how the facing/baffle/chamber/window/rails/etc. equations would shift and change in a way that a noob would not account for all at once, or that even an experienced refacer might fail to account for all in one go -- anyway, where I made the 8* look more even and presentable, I got a result that I really dislike.
OK...that said, back to the 8* and 7* and original form, notes thereof:
- the similar baffle unevenness implies the same blank. I don't remember if these were sold as "lost wax" or what the marketing was. But the Occam's Razor explanation is that, based on the time period -- one where there was kind of a "lost wax" fad, which (not unwisely?) continues today in a more "granular" fashion -- probably the blank is in fact from some player's treasured vintage (real vintage) Slant sig Link. I think this is actually explicitly stated, somewhere, in Otto Link marketing materials, but just saying that's what it is doesn't mean it's true. My point is that the unevenness of the baffle tends to suggest it actually IS a casting/reproduction of an actual piece -- maybe even a reworked one -- because if they worked from scratch the result probably wouldn't be a blank that is so uneven in the baffle, with one side so much higher than the other. If you look at that Instagram link, the appearance is not deceiving. The baffle in the 8* really is that uneven.
You can also get an idea of how uneven the baffle is from looking at the pics here:
P.T. on Instagram: "The hideous one wins. #newslantsigs #notesofanoob (Follow up details in a sec)"
The second pic is the reworked 7*, and the baffle is *still* high -- and the rails as well have already been thinned (more on this in a moment) from original, even though they are still probably a little wider than the 8* overall) -- and despite that the baffle is still high, and has been filed on as much as it looks like it has, the left side's shininess is original, i.e. I did not polish that side. That side is smooth/black/shiny because it was not touched, and it is that much lower than the right side that even after lots of filing the right side remains that much higher.
- Rails. In that same last Insta post, above, the 8* is yet untouched. As original, the 7*'s rails were probably almost a full 1/3 wider near the heel of the window than the 8*. To me, intuitively, that makes sense. The 7* is a sort of the size 10-10.5 shoe of the tenor Link sizings -- not too large that a beginner can't grow into it, not so small that a skilled player cannot feel like they have room to inflect/articulate/pronunciate/express. It makes sense to me that that "middleground" type of piece would have thicker rails for a more predictable response, requiring less care in placing/situating the reed, being possibly more tolerant of more reeds, trading less subtle response for more predictable response, especially in low notes where subtone and the complexity of how players play subtone may matter less than it will for more advanced players who seek larger openings.
[OK...pausing here for now...more notes to come, main points to come...TDLR, I know, but I don't see where any of these topics don't matter, or aren't useful to someone later....]