johnboy
Senior Member
- Messages
- 1,053
- Location
- ISLE OF WIGHT, UK
Hmmph - See if I care
John.

John.

Firstly I'd like to thank everyone that has replied to this thread! It has been a most interesting read
I tried Griff's idea first with some Wire Wool (Grade: 000) but it didn't seem to remove as much brass as needed.
So I opted for Stephens method and used 800 grit. However, I also took the advice of the Tech from the dealer and sanded the whole Tenon evenly. It didn't take many passes before it fitted. I used the wire wool to polish it up and cleaned the Socket and Tenon with Meths.
I took Griff's advice to mask up the crook which was very fortunate as I slipped a couple of time which would have put a minute scratches on the crook!
I haven't taken it down to a loose fit though! It is now snug. It glides in smoothly almost all the way then gets a snug the very last 1/64th inch which suits me and no doubt will bed in over the coming weeks!
At least I don't have to fight it to get it on and off now 😀
I decided to check "Urban Dictionary" to see if there was both a left and a right ...
Here is what they say: A Quote ...
Birmingham Screwdriver
A hammer. Usually used on delicate devices when a real screwdriver would be better. Refers to the habit of a Birmingham inhabitant (i.e. a simpleton] to take a rather simplistic view of maintenance.
If it don't work - hit it.
If it still don't work, use a bigger hammer.

Hmmph - See if I care
John.
Meany :crying:Well done, glad it worked ;}
John.
Nice one....all sorted now.
