Where the receiver joins the main body of the sax there's a small ledge. If the tenon height is sufficient to rest on it once fully inserted, this contact (also) contributes to sealing the connection. My old René Guénot alto neck seems to seal well, I suspect more due to this factor than being snug around the tenon perimeter, because the original neck tenon is a fraction more loosely fitting than other necks in other horns I have. Those, however, do not seem to have neck tenons exactly as long as the depth of the receiver. That means those tenons have to seal outwards against the receiver wall, in the conventionally understood way, and any slight deformation, ding or scratch could compromise the tenon seal.
This gave me the idea of putting in one of those old fashioned hard plumbing washers on the inner ledge, and the resulting seal is excellent.
This gave me the idea of putting in one of those old fashioned hard plumbing washers on the inner ledge, and the resulting seal is excellent.
Last edited by a moderator:
