Saxophones Neck for Yani TWO-1

iiVb9I

Member
Messages
47
Location
California
I purchased a yanigasawa two-1 last December. Love the horn, but occasionally I get a gig at a 100 yr old lodge in our ski town. Small very warm room, big fireplace, nice acoustics vs a few large noisy restaurants here. They want warm background standards, non-disruptive mellow tones so that guests can sip their warm brandies etc. and converse with each other.
I switch to a boeskin neck that I got with an old horn I don't play much. I also switch to a Celebration mouthpiece from 10MFam. This combo works pretty good, but the neck is a little loose. Was thinking of another neck that might impart that same warm sound. I still use the yani neck with a Showtime piece and Rigotti reeds for the noisy restaurants and outdoors in the Summer.

Just looking for suggestions. Granted some of these custom necks like KB, Gogler might be overkill, but just trying to get some feedback.

Thanks
 
Does the neck really make a significant difference to the volume or brightness of the sound ? Mouthpiece, sure but I doubt whether the neck really makes a difference to what the audience hears.

Maybe if the neck tenon is leaking a tiny bit, that will be sucking edge. volume etc out of your sound ! You can easily get the neck tenon modified to fit better.

Rhys
 
I have always played the neck that came with the horn, but I remember trying a bronze Yani neck on a standard lacquer Yani, 992 neck on a 991 and there was a difference in what I heard, it was a small difference but it might be what you want and it would be cheaper than a custom neck.
 
Last edited:
I have always played the neck that came with the horn, but I remember trying a bronze Yani neck on a standard lacquer Yani, 992 neck on a 991 and there was a difference in what I heard, it was a small difference but it might be what you want and it would be cheaper than a custom neck.
yeah I was thinking of another yani neck. bronze maybe
 
A flexible set up is a charm. A set up that will whisper and shout with the chops to choose and control is what every player needs.

A softer reed is a good place to start.
mark sepunick, who sold me the Celebration mouthpiece, said the rigotti reeds i was using are bright. he suggested vandorens or alexanders. I like the alexanders. haven’t tried moving away from 2 1/2 that i normally use. but I might have some 2s lying around.
 
i thought i saw something where Boston sax shop provided tape with their necks. Any particular type?
Thin tape, like brown packing tape or sellotape. I got second neck for my 10M that came a bit loose, just needed one layer and it snug as.. saves a few quid at the tech until I get it serviced and he can do it properly
 
Surely, if the OP wants to change the sound, a better option would be a different mouthpiece and keep the original neck? Instead of trying to change sound by changing the neck (which I've never found makes much difference anyway) and using a neck that doesn't fit with some added sticky tape?
 
Surely, if the OP wants to change the sound, a better option would be a different mouthpiece and keep the original neck? Instead of trying to change sound by changing the neck (which I've never found makes much difference anyway) and using a neck that doesn't fit with some added sticky tape?
I did try a different mouthpiece and reed setup (10mfam Celebration and alexander or vandoreen reeds vs rigotti), but the neck definitely adds to the warmth of sound. Tried plumbers/teflon tape. Too thick. I might consider another horn.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,063
Messages
578,431
Members
8,130
Latest member
tommyliehe
Back
Top Bottom