- Messages
- 296
- Location
- Indiana
This came with a 1923 Conn C Melody that I won on ShopGoodwill. Unfortunately it was chipped. I watched a YouTube video by Mojo that shows how he repairs chips. Mine was no where near as badly chipped as the one that he was repairing. Afterwards I found the MP is very stuffy and seems hard to blow. I watched some more YouTube and since I didn't have much to lose I decided to see if I could open it up. I don't have any real MP tools. I used the table on a hobby planer for a flat surface, a metric feeler gauge set, some 500 grit paper and a very small square file. Somehow or another it worked pretty well. When I started it measured 1.25mm at the tip, I have managed to open it to 1.50mm. It does blow quite a bit free-er. I wish I could go more but I believe that the tip is too thin to get any more out of it.
I am using a Legere 2.5 Signature Cut alto reed and the ligature that came with it.

I am using a Legere 2.5 Signature Cut alto reed and the ligature that came with it.

Last edited:
