mouthpiece position

Yes, the mouthpiece is moved for tuning. Different mouthpieces and horns require different positions. My classical mouthpiece needs to be pushed about 3/4 of the way on to be in tune, while my jazz mouthpiece needs to be about 1/4 of the way on the cork. It really just depends.
 
Typically a mouthpiece with a large chamber will need to be further on, and a smaller chamber further off the neck.

And anybody is welcome to correct me, but I don't believe a clarinet has a fixed position, the mouthpiece can also be pushed on or pulled off the barrel for tuning.
 
In order to get my tenor in tune (1943 Buescher), I have to wrap a piece of paper around the cork before attaching the mouthpiece. I could get it recorked, I suppose, but the paper works well enough for now.
 
My mouthpiece does have a fixed position. When the sax was warmed up I used a tuner to find the sweet-spot on the tenon and then I marked it with a pen. I always line up the mouthpiece with the line, and seldom have to do any adjustment when playing with others. I played the clarinet for a while before buying a tenor sax. In no time at all the lower register was sounding fine and the second register was sounding dire. This seems to be the way of it. If you are new to the saxophone just keep at it. It took me some time to get the registers sounding as if they belonged to the same instrument. Good luck.
 
I've found my mouthpiece has to be pushed quite a way down the cork for it to be in tune - it's a Meyer 8M on a YAS62, I don't know if other 62 players have to push their pieces as far down, as I have less than 1/4" of cork showing with it on. Could one's embouchure have anything to do with how far on you need to push the mpc? Meaning tighter embouchure, not so far on the the crook, looser embouchure, further down. This would mean my embouchure is looser rather than tighter...
 
I had to have my baritone neck recorked and the line I referred to above is now on the lacquer. The tech must have used a narrower strip of cork than the original. It works fine. A 1/4" of cork showing sounds good to me.
 
Bobby G wrote:
Meaning tighter embouchure, not so far on the the crook, looser embouchure, further down. This would mean my embouchure is looser rather than tighter...

This makes sense to me.
 
Justin Chune wrote:
My mouthpiece does have a fixed position. When the sax was warmed up I used a tuner to find the sweet-spot on the tenon and then I marked it with a pen. I always line up the mouthpiece with the line, and seldom have to do any adjustment when playing with others. I played the clarinet for a while before buying a tenor sax. In no time at all the lower register was sounding fine and the second register was sounding dire. This seems to be the way of it. If you are new to the saxophone just keep at it. It took me some time to get the registers sounding as if they belonged to the same instrument. Good luck.

although you tuned up when it was warm do you not move your mouthpiece if, for example, you go and play in a cold village hall?

I am always adjusting my tuning - maybe 3 or 4 times throughout a 2 hr concert. constantly listening to both myself and others and adjusting as required.
very important during public performance especially when you're playing with 9 clarinets, 6 saxes 2 bassoons 2 oboes and 4 flutes in the woodwind section!
 
I do find that there is a sweet spot on my instruments.
I have marked where this is and as standard put the mouthpiece on according to the line, then I tune up from there. Most of the time it never needs any adjustment, or a very small one.

If I'm playing on stage I let my instrument warm up under the lights first before I tune, I don't normally have to make an adjustment untill the interval when it's no problem.

I played in a cold village hall once with 15 strings and a piano on my flute. That needed a lot of adjustment consistently.
 
We did have an extensive thread on the effects of temperature change on saxophone tuning, when was it? Robbie the robot? 2006, I seem to remember but I'm tired and depressed, and shall henceforth and forever no longer offer proved scientific explanations. (Hint) speed of sound/air temp. NOT - sax temp.
Other physical acoustic constants apply for stringed instruments of course .
 
mfox wrote:
one thing when tuning, if your cork is tight remove the crook form the body of sax before you push and pull..

I'll second that, I remember doing it the wrong way on my first alto when I didn't know any better. The way the cork shears off the crook is quite spectacularly disconcerting. So desperate was I to carry on playing, I fashioned a temporary cork from gaffer tape - what's more, it worked fine!
 
[color:green]I had tuning issues at my lesson the other night. My teacher noticed that I was sharp on the 'E', but ok on the other notes (well, B, A & G). So embouchure has a big effect on tuning too. My homework for this week is to use my tuner and watch what happens as I relax my embouchure on each note. It seems that I can tune the sax for B, A and G, but then have to relax my lower lip for the higher notes.

More things for a beginner to worry about!!!! :cry:

[/color]
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,069
Messages
578,506
Members
8,131
Latest member
Jef B
Back
Top Bottom