Tech/maintenance Mouthpiece Care

kevgermany

ex Landrover Nut
Messages
19,857
Location
Just north of Munich
Trying to get back into playing again, embouchure gone, dead sound, struggling. Was starting to think it was a dead reed. Took it off to change it and saw a thick layer of hard white calcification. Cleaned it off with some citric acid and the sound was back....

I was getting lazy, leaving the reed on the mouthpiece and so not cleaning it out after playing, so all the solids were clogging it and calcifying as they dried out. From now on I'm going back to reed off, clean mouthpiece after playing
 
Its bad for your mpc to stay setup all the time...especially if you tightn ligs liberally. Ive seen tables warp lengthwise as a result. It takes a while but it can happen. On metal pieces it can lead to plating and metal corrosion.
 
I was getting lazy, leaving the reed on the mouthpiece and so not cleaning it out after playing, so all the solids were clogging it and calcifying as they dried out. From now on I'm going back to reed off, clean mouthpiece after playing

Wot! :w00t:

Very bad habit. And now you can see why. Unhealthy too.

But most of all, if you want a good reed, you need to wet it before playing, don't you? Otherwise you can imagine what's going on underneath and alongside the reed. Wet and dry variations leading to probably unpredictable things. Not that anything is predictable with reeds... So don't tempt evils to come and play a part in it!
 
Trying to get back into playing again, embouchure gone, dead sound, struggling. Was starting to think it was a dead reed. Took it off to change it and saw a thick layer of hard white calcification. Cleaned it off with some citric acid and the sound was back....

I was getting lazy, leaving the reed on the mouthpiece and so not cleaning it out after playing, so all the solids were clogging it and calcifying as they dried out. From now on I'm going back to reed off, clean mouthpiece after playing
Where's the BBLLLLLLEEEEEEEEEUUUUUUUUUUUUGGGGGGGHHHHHHH-icon when you need it???

You've really let yourself go @kevgermany
 
Some of the reed players at school are like that. They'll keep using that reed even if it is split, chipped, warped... It never goes in the bin, and they don't even buy the thing, it comes from the teachers drawer
 
I've always tended to leave my reeds on the mouthpiece, ready for use. It's easy to put it under the tap and run some water through the mouthpiece, before and after. I do tend to remove it and clean any crud off every so often and in my experience it takes a few years for any serious calcification to build up on the baffle, which is easy to dissolve with some vinegar.. I rarely had a reed go mouldy - and not at all now I use plastic reeds.
I wouldn't do this if I played a plated metal mouthpiece - my fisrt hornr came with a B&S metal mouthpiece that had a tattered reed stuck to the table and the plating had bubbled and corroded. So I had to carefully smooth it with 1000 grade wet and dry paper on a flat surface plate.
I've seen stainless Berg Larsens with a bit of corrosion and pitting on the table, but only minor compared the the depth of the milling grooves.

I'm lazy and I like to just pick my sax up and play it whenever I want to or whenever the neighbours have gone out... When I read about Sonny Rollins having a saxophone in every room in his apartment so he could play whenever the mood took him, I felt a certain kinship
the aim is to play music, not fiddle about with reeds and other stuff
 
This thread prompted me to take all my m/pieces off my horns (yep, I generally leave 'em on - for a looooong time) and give them a good clean and soak in a tub of water with some Milton Sterilising fluid added. They were in surprisingly good nick - with no discernible deposits of any kind.
 
I'm hopelessly untidy

But, for reasons I can't completely explain, I swab through mouthpiece, neck and body after each and every play

There's been no encrustation on my kit apart from the left palm key pads of my most used horn and on the water key cork on bari
 
I play metal mouthpieces with diffent baffles. I clean my mouthpieces after each and every play. Luke warm water with a drop of detergents. These small brushes are really useful. They are doing a good job on high baffle mouthpieces with small chambers.

A small chamber tenor mpc with high baffle and bullet step. Bare brass (been plated)

20250716_094936.webp


A medium chamber baritone mouthpiece with lower baffle and straight step. Bare brass.
20250716_094551.webp
 
Last edited:

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,058
Messages
578,315
Members
8,127
Latest member
PJ2116
Back
Top Bottom