Tech/maintenance Metal Clarinet service repad

@PigSquealer your photos of your work are really good. What kit do you use for that? (Apologies if you've previously posted that somewhere and I've missed it.) Photographing metal shiny things is never easy, nor is close-up work.
Actually I’ve never posted this information before. Nor has anyone ever asked. Never really gave it much thought. I spent a lifetime in the graphic arts business a.k.a. commercial printing. I’ve been on a few photo shoots.
Thanks for the compliment.
All of my photography is done with iPhones or a iPad. Prior to January 2022 I was using a iPhone 5. Currently using an iPhone 12. The iPad is an Air 2.
Close-ups are actually done at a distance. Distance away zooming in allows more light into the lens. Lighting can also be tricky. I use cool white lighting. It’s more blue spectrum. My preference for greys / metal.
A picture like this I’m typically shooting about 2 to 3 feet away from the object. Take a deep breath and shoot the picture. Rarely do I prop the camera or use a tripod.
1663058763395.jpeg

This was just a quick snap. Typically I would adjust my lighting to remove the shadows reflections.

A picture like this was staged. Taken a couple feet away through a hole in a white sheet. Reflections are killer on a bell.
1663059530433.jpeg

1663059653851.jpeg
 
I used a stock set of Ebay Chinese bladder pads on my Bettony. They all fitted perfectly.
The same set didn't fit the Selmer but a different set did.
The sizes are listed in the description.
Very clever these Chinese.
I avoid eBay like the plague. I would rather spend a couple dollars more and support my local brick-and-mortar companies. The pads are domestic.
1663086688789.webp
 
Several potential fixes.
More light preferably defused
stand back farther zoom in more and focus more to the middle of the object. Phone or camera?

It was my Nikon Z6 with the 24-70mm lens. I could have stood further away and used the 70-200mm lens
 
Have you ever tried using "stepped pads" that over hang the key cup? If you get the correct thickness, they are easier to make look good.

View attachment 21346
1663132293730.webp
Yes, the pads I used were shouldered or stepped. I could have spent a month getting everything to fit just right. Customer came in with urgent need to have his bagpipes cleaned . I did what I could and moved on to the bagpipes.
 
Chinese pads are a bit of a hit-and-miss affair. It's difficult to know what pads you will receive. Some are quite good whilst others aren't. Sometimes the felt is a bit soft and can be too thick. The biggest concern is the skin quality which can become brittle after a short time. So some pads will last a reasonable time and others last a year or two. There's not an easy way to tell which you are going to get.
I just had a customer come in with his £2000+ clarinet which he'd cleaned and thought he'd put in a set of pads whilst he was at it. He'd done a neat job but nearly every pads leaked.
These particular pads were ones copying the Lucien Deluxe, with the name Lucine Deluxe. I didn't realise at first as they had manged to put the card backing on the wrong way round so no name wasn't visible until you took the pads apart.
I had to replace 3 or 4 pads due to thickness issues or flaws. Once everything sealed properly it worked very well.

Ebay pads are a few quid a set. Ordinary pads that professionals use are £2 each or about £3.50 each for the better quality ones.
 
Thanks for sharing the products experience.
I’m not overly fond of Asian pot luck parts.
A half gallon of milk here is now $7/ £6
The set cost about $17 £15. Good quality.
These pads came from Instrument Clinic. I’ve use the pads before with good results. Music Medic too. The number one issue was the new adhesive pellets. Expanding and shrinking to size of cup was crazy. Reheated way to many times to get good fit.
 
So back to the metal clarinet.
I met SOTW member Dave Dolson over the weekend at a local gig. For those who don’t know Dave. He is a pro player of Trad / Dixieland music. He personally owns a Sliva-Bet and was game to give the Cadet a honk. The Noblet 2v mouthpiece I brought….yikes. Still it played respectable right off the bench. Well that was after Dave cured the stuffy issues :doh:

played stuffy ! Ya think so:confused:
E4E840CB-AFCD-4344-AFD0-E58A37D66217.webp
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,571
Members
8,133
Latest member
walthang
Back
Top Bottom