Saxophones Martin stencil Bari Age?

Falcofra

Member
Messages
8
Location
West Wales
Hi, I bought a vintage Lewin baritone which I believe is a Martin stencil. It's a beautiful silver horn and plays really well. I'm curious to know how old it is and I've been unable to find info from the serial number, 192297. it says Lewin, made in USA.
I was surprised that there is no side key for C, just 2 side keys for B flat and top E so that must put the age of this instrument way back in late 1920's or 30's I would think?
I use side C a lot on my tenor especially going up from B to C but I'll just have to get used to 'switching' 1 and 2 on the left hand with this Bari. Otherwise its a great instrument.
Any clues about its age would be appreciated.
 
Martin serial numbers changed over the years. A #195XXX can be a sax made in 1929? In 1929 - 1930 Martin dropped the first digit on most serial numbers and Martin and Indiana became two separate companies. Another change came around 1935 (Committee was introduced). All Martin "Committees" have six digit serial numbers. But also Martin Handcraft Imperial had six digit serial numbers when the were introduced in 1933-1934. Martin serial numbers are bewildering???? I think your #192297 Lewin baritone is made (for Lewin by Martin or Indiana) in 1929 before the changes of the serial numbers. It's probably based on an older Handcraft model. A #192 XXX "The Martin" was made in (the late) 1954! I got this information/facts from a saxophone historian in 1983 when I bought my first " Martin " (The Martin). So there are perhaps new facts and information about Martin serial numbers?
 
If the instrument is keyed to high F, it's likely that one of the side keys is a "dual acting" key - if my memory serves, the lower side key will sound Bb when you finger for a side Bb and will sound C when you finger for a side C but use the lower side key.

It might be the upper side key sharing high E and side C duties.

Try it out and let us know.
 
1929 is near what I thought so that's great thanks!
The side keys are bottom for Bb when fingering A but the top key lifts two pads together the lower one gives a C while fingering B but because it also opens top E it sounds an E. If you hold down the E pad with a cable tie it sounds the C.
Is there a method to get C without fixing the E pad down? I can't see how!
I often use side C but very rarely use high E so I'm happy to keep a cable tie on it for now.
 
Something's misadjusted bent or missing.

There should be a piece of the mechanism that holds the high E closed when you push the LH index finger key. So if you are fingering B and push the upper side key, the E is held closed and the side C opens; if you're not pushing that finger, then the high E opens as well as the side C (the side C being open or closed won't have any effect if you're playing high E or high F).
 
It seems that in the attempt to reduce complication by having only two side keys, they added more complication with articulated joints and double-action side keys. Me, I'd rather have the three simple side keys each with one and only one function.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway πŸ˜€

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,074
Messages
578,631
Members
8,133
Latest member
walthang
Back
Top Bottom