Saxophones Mark VI Alto - What to look for?

Seems like a good idea to try as many Mk VIs as possible, even if you fall in love with the first one you see, they're all going to be a bit different given the age and lives they would have seen in the last 48 to 68 years!
 
Seems like a good idea to try as many Mk VIs as possible, even if you fall in love with the first one you see, they're all going to be a bit different given the age and lives they would have seen in the last 48 to 68 years!
I think this is the best advice, try as many as possible, just remember if you had 10 mark vi's in a row they will all sound different, go with your ears, if investment is important it might be better to go with original lacquer although you can still get some re-lacquers that sound good.
Some I have tried were very resistant, so don't buy blind no matter how good the deal is.
They were hand built and Selmer made lots of them and there are some great gems out there but plenty of dogs too.

Good luck
 
I was at Paul's when Trigger took it in.
As worn out as you're likely to see.
How much under your budget did he get, in percentage terms?
He made a key for me years ago, but yours was a whole different kettle of fish!
Overhauled my SDA too and made a perfect domed resonator for the one original missing.
 
If you saw it when I took it in you’d have thought it was on the titanic

I did... but I don't remember a huge wet shipwreck being there?

Dave I was only into it for less than a third of a normal mkvi original lacquer after it was finished

Now let me try and decipher... hmmm... either:
(a) the repair cost me less than a third of a normal MkVI with original lacquer, or...
(b) the sax cost me less than a third of a normal MkVI. The sax had original lacquer after it was finished, or...
(c) the sax and the repair cost me less than a third of a normal MkVI with original lacquer.

I think it's (c) above. Am I correct?
 
For argument's sake, in the US, a orig laq VI in good condition would run about $6k, making Trigger's restored one about $2k, which is an amazing deal. But if I had that kind of money burning a hole in my pocket, I would not buy a VI, but a Yamaha or Yani.
 
For argument's sake, in the US, a orig laq VI in good condition would run about $6k, making Trigger's restored one about $2k, which is an amazing deal. But if I had that kind of money burning a hole in my pocket, I would not buy a VI, but a Yamaha or Yani.

Which would probably retain their value quite well, but I imagine that Trigger is sitting on quite a profit (not literally).

Rhys
 
For argument's sake, in the US, a orig laq VI in good condition would run about $6k, making Trigger's restored one about $2k, which is an amazing deal. But if I had that kind of money burning a hole in my pocket, I would not buy a VI, but a Yamaha or Yani.
But I’ve already got two Yanagisawa A880.A 990 A991s and a A992
And believe me after the restoration Paul has done on the mark six it was well worth the money
 
I recall Di in France here saying she loved her A880. I've had two 901s, did nothing for me, but the older A6 (or whatever it is) Super Pennsylvania seems to have more to it. Maybe, as some say with older Selmers and Yamahas, the oldies have an ingredient missing from newer horns? Or maybe I'm vintage and so I like vintage?
 
😱😱 Sorry Dave I was dictating to text and didn’t read it before sending
Yanagisawa A880 (1of2) I have really great sound modern keywork , tuning is good
The mkvi (lassie as it was a dog when I got it ) Paul had done an amazing job again tuning is good , nice feel under your fingers plus ive seen it come back from the dead
 
There are quite a few folks who swear that the difference between a good and a bad MK VI is the neck tenon fit. I know it makes a hell of a difference in tone and feel on every single horn that I have had adjusted/fitted so that's one of the things I would really watch out for. It's a cheap adjustment so if you find one you don't really like and it is budget priced, take it to a good tech and see how much of a difference / improvement you can get and then evaluate against the price.

Note that a good fit does not mean that it doesn't wiggle. What it means is that you can insert it with marginal force with the tenon screw open and if you tighten it, it feels like it is one solid piece. Anything else is useless.
 
Just a few before
 

Attachments

  • 78BBC1D0-466C-4C30-B575-087E76865C2C.webp
    78BBC1D0-466C-4C30-B575-087E76865C2C.webp
    24 KB · : 181
  • 82F561A3-3D84-447F-AC49-6C4B37879BD8.webp
    82F561A3-3D84-447F-AC49-6C4B37879BD8.webp
    40.3 KB · : 140
  • B298B2E1-3C7E-4D28-9E97-EC80B32378F6.webp
    B298B2E1-3C7E-4D28-9E97-EC80B32378F6.webp
    40 KB · : 175

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,076
Messages
578,681
Members
8,136
Latest member
peterdehelegrote
Back
Top Bottom