Tech/maintenance Ligature screws

Inches or metric?

I used to have 6-32, 6-36, 8-32, 8-36 brass and nickel wing screws. Just one length.

Stainless insex screws can be used as well. Can be used as a Berg Larsen round screw, Available in different lengths.

A sax tech can probably help you with new screws.
 
or the wrong size for the mouthpiece that you are using it with (too small)
I agree, which kind of implies that using a badly fitting ligature with the wrong screws may be detrimental to the sound and performance of the saxophone.

Some photos to show the issue may enlighten us a bit further but definitely you should not need to be doing this.
 
Last edited:
Searching for ligature screws, I came upon screws with this design. The threads on opposite sides are flat. Can anyone tell me what purpose this serves or what these types of threads are called? Thanks.

1688675842110.webp
 
Searching for ligature screws, I came upon screws with this design. The threads on opposite sides are flat. Can anyone tell me what purpose this serves or what these types of threads are called? Thanks.

View attachment 23310
I’ve seen this before, but for the life of me I can’t remember for what at the moment. Something like turning another component on the shaft.
@turf3 may know.
 
Screws with a flat on each side that I've seen are bottom-of-the-barrel die cast screws, that need the flat to be removed from the mold. They should be avoided. A lot of el cheapo two screw ligatures now come with those.

It's really hard to find thumbscrews with a shoulder (as required by ligatures and neck receivers) in a variety of sizes, from the general purpose small-parts suppliers like McMaster-Carr, Metric and Multistandard, or Misumi.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,572
Members
8,133
Latest member
walthang
Back
Top Bottom