Saxophones King Super 20 Owners, How Many Are We?

Did someone say King Super 20 Silversonic 58..? now then Mr Pimpington (come clean are you really a pimp?) would you like to swap it for a 47 RTH 10 m? PM me buddy..
 
It's Fraser, and, oh you don't own one, oh ****...well never mind innit...I played mine off once againsed a 53 mk6 (I know 53 but it was) my king blew it away apart from low D down then the Selmer was da boss!
 
I'm in with 3 tenors and an alto. Tenors:
300xxx S20 new pads and corks otherwise all original (still has gold laq on the silver neck) MPC picky but plays easily and richly with a 10Mfan Robusto 9
400xxx Silversonic, Gold leaf on the bell. I get a little resistance with this horn. Plays best for me with a 10Mfan Boss.
433xxx Eastlake Silversonic. Very free blowing. MPC friendly. Guardala (original) King

Alto: 410xxx S20 going back and forth between a Dukoff Miami Silverlite vintage (9) and David Sanborns copy of the same with a step baffle.

As mentioned on another forum: A little trick from my very accomplished tech Lee Kramka in San Francisco for the notoriously sticky G#. He removed the key; put liquid bandage on the pad; let it set up; then removed it using his thumb. No more sticking!!!!!! and I am unfortunately a wet player. Should stick to tenors hahaha.

Love my King tenors! In the tenor closet are a MVI; a 30M; The Martin (very rich bottom end); SA80 Series II (3 necks including a gloger sterling thin wall) Sold the TH&C and beautiful 1940 Zephyr Special. Drag the others out occasionally.Try out a ridiculously large number of mpc's; Then put them away, and back to my Kings.
 
Tenor(s):
300xxx Cleveland S 20 (pictured in avatar) Full Pearls White Roos Resotech Resonators. 10Mfan Robusto 9
400xxx Cleveland Silversonic Gold leaf and wash in bell 10Mfan Boss 9
433xxx Eastlake Silversonic, The most free blowing of the lot. Very mouthpiece friendly Guardala (original) King
Alto:
410xxx Cleveland S 20, Also very mouthpiece friendly (Saxz/ David Sanborn signature 8 (Similar to Miami Dukoff with a step baffle.

Everything else now stored away
 
Tenor(s):
300xxx Cleveland S 20 (pictured in avatar) Full Pearls White Roos Resotech Resonators. 10Mfan Robusto 9
400xxx Cleveland Silversonic Gold leaf and wash in bell 10Mfan Boss 9
433xxx Eastlake Silversonic, The most free blowing of the lot. Very mouthpiece friendly Guardala (original) King
Alto:
410xxx Cleveland S 20, Also very mouthpiece friendly (Saxz/ David Sanborn signature 8 (Similar to Miami Dukoff with a step baffle.

Everything else now stored away
Update on set ups

Made some changes recently on my setups: 300xxx S20 has a little more spread sound and I have switched to a Barone HR Trad Contemporary 9. Need to warm up for a few minutes or it sounds a little tubby. It's a large chamber low baffle mpc but altissimo is pretty clean up to D-4 (my limit).
On the 400xxx I have switched to a Wanne Shiva 9 which works well with this horn. The horn itself has a little more resistance in general and a more focused sound. Good to D-4
I am not really playing the 433xxx Silversonic Eastlake any longer as the two above are way plenty for me.It is very mouthpiece friendly with virtually no resistance up and down.

On Alto I have switched back to my 1956 silver plate (Euro) Mark VI with a Barone HR 6 Traditional Contemporary. The tone of this early VI is very fat, more SBA-like than the later MVI's. Better for ballads and I really do not have the alto chops to go into the stratosphere. (Approaching age 65 I don't see that changing hahahaha)
 
If I were looking for an S20 alto, then...
1/ Is Silversonic better than brass bell, or not? Why, in either case?
2/ Is a Cleveland model SO much better than an East Lake? Are later "USA" horns to be avoided? Why?
3/ Which years/serial numbers are the ones to go for, and why?
4/ Are the late S20 bodied Zephyrs, or Zephyr Specials really as good as a proper S20?
Thanks for any advice.
Any links to good S20 info would be welcome.
 
If I were looking for an S20 alto, then...
1/ Is Silversonic better than brass bell, or not? Why, in either case?
2/ Is a Cleveland model SO much better than an East Lake? Are later "USA" horns to be avoided? Why?
3/ Which years/serial numbers are the ones to go for, and why?
4/ Are the late S20 bodied Zephyrs, or Zephyr Specials really as good as a proper S20?
Thanks for any advice.
Any links to good S20 info would be welcome.

Silver vs brass: Others may disagree but I think it is largely cosmetic. I own 3 King tenors and one alto. Two silversonics and 2 S20's. I think year of manufacture has a greater bearing.My 300xxx definitely fatter with strong overtones down low(S-20 in the avatar). 400xxx Silversonic more resistance more focused brighter tone. Both are mouthpiece sensitive requiring large chamber mpcs (Wanne. 10Mfan; RPC; Lawton; Barone HR)

Cleveland/Eastlake: I have one Eastlake Tenor with an early Serial number (433xxx). In discussing with some older techs with a sax manufacturing background it was surmised that 1.) A lot of tooling was brought over from Cleveland to Eastlake; A lot of inventory (parts) were brought over from Cleveland; So it's likely the early Eastlakes are very close to the late Clevelands. My Eastlake tenor Silversonic is extremely free blowing and mouthpiece friendly compared to my 400xxx Silversonic and 300xxx S-20. I can play Guardala's(and clones) Berg; Dukoff etc with the Eastlake with no gurgle down low.

I owned a very early Zephyr Special from about 1941. Beautiful horn but I found the "vintage" sound ultimately unappealing (personal preference).

I have one Alto S-20 Series IV (410xxx) and it's a strong player. However I am primarily a tenor player and for me the embroshure requirements to properly play the alto would mean that I would have to spend a lot more time on it than I care to. It's currently gathering dust in the closet. Definitely brighter and more focused than my 65xxx Mark VI. It is mouthpiece friendly and I have played a Dukoff 9 (like Sanborn's and it sings very well) My older MVI is more suited to the fat sound of a Barone HR Trad Contemporary 7.

Hope this is helpful. It was mostly on tenors plus some research I have done over the years.
 
Interesting email chatting with Dr Paul Cohen today, and with Pete, ex owner of sax pics.
Paul reckons the S20 is the iconic US horn and an East Lake Silversonic would be difficult to tell apart from a Cleveland model. Pete disagrees and says a Comm III would lend itself to more music styles, doesn't like the intonation but finds it better than the S20 which he really doesn't like.
Looks like that Comm III could be coming home with me when I'm in the US next. It's a fifth of the price of the Silversonics. But then I do have my cheap old Conn already! πŸ˜‰
 
Interesting email chatting with Dr Paul Cohen today, and with Pete, ex owner of sax pics.
Paul reckons the S20 is the iconic US horn and an East Lake Silversonic would be difficult to tell apart from a Cleveland model. Pete disagrees and says a Comm III would lend itself to more music styles, doesn't like the intonation but finds it better than the S20 which he really doesn't like.
Looks like that Comm III could be coming home with me when I'm in the US next. It's a fifth of the price of the Silversonics. But then I do have my cheap old Conn already! πŸ˜‰

I would agree that the King's are not overall utility horns like say for example Selmers. And the Martin's have a rich unmistakeable voice. (I own a 1923 Curvy SOP and a Late 40's The Martin). But for Funk, Jazz and Rock I love my King's. Catch Wilton Felder with the Crusaders on YouTube: Scratch; Way Back Home; Eleanor Rigby. I think he plays a high baffle Berg. Had the privilege to see him with The Crusaders a year ago, before Joe Sample passed, here in the Bay Area.

On the 300xxx S-20 I have switched back to an old HR RPC. It has a 130 tip which was a bit daunting initially but finally got it down. On the 400xxx Silversonic a Wanne Shiva 9 seems to be working out best for me.
 
Well David, there`s the green light to give both the S20 and Comm-III a go .. I`d say that Conns were the Iconic USA horns - the 6M and 10M , everyone has their own views including those who`d say Buescher in the Truetone to TH-C era
 
Much of the 6M appeal is in the light fast slick action . I find it hard to believe that a Kohlert will match it there ... there are a number of saxes which Sound like a 6M including cheapo Mexiconns
 
Ooooo!! Sidetracked...

king zephyr silver alto 002.webp


king zephyr silver alto 003.webp


202***
Too much at Β£1,000
 
Β£1000 too much for a Silversonic - are you serious ?, I`d rather have Β£1000 tied up in one Silversonic than a roomful of mouldy old no-namers .

Not seen one with Zeph type Brow guards before, or overslung neck - Thom ?
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,578
Members
8,133
Latest member
walthang
Back
Top Bottom