Tech/maintenance King Saxello thread size

Measure OD of the threads with a caliper, measure the pitch with thread gauges (inch!) and look up the thread in Machinery's Handbook.

There's no guarantee on a 90 year old horn that there's never been any work or changing of that axle.

Are we to believe that someone who has the skills and equipment to make a new hinge rod doesn't know how to measure a thread?
 
Vote:
Upvote 0
I'm making a new rod.
If you still have the old rod. Take it to a machine shop or machine supply store. Have someone help you select the correct die. Expect to pay £12-£15 for the die. Then you’ll need a die holder. Another £12-£15.
If the replacement rod diameter is the same. You’ll still likely need to machine down the major diameter so you don’t damage the die. Once you survive all that….you’re going to need to slot the end @ 032/0,81mm wide, 2mm+/- deep in a rod +/- .100/2.54 diameter. Swing a rubber chicken over your head for good luck. Then try using a hand saw.
Or you can buy a £80 tool for that. Not including the holding handle (£27) or drill (£19) or bench motor (£520). Yeah the 01 grade rod is £6.
1705997963434.webp

1705998292436.webp
 
Vote:
Upvote 0

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,070
Messages
578,524
Members
8,132
Latest member
LouisJR
Back
Top Bottom