Tech/maintenance Is there an easy diy fix for leaky palm key? (Eb)

Sue

One prosecco, two prosecco, three prosecco - floor
Messages
2,552
Location
Durham
Hi, I've just put a leak light down my tenor (YTS 62) as it wasn't playing like it was a couple of days ago. There is a leak on the palm key (Eb). I've tightened all the screws.

I can't find any magic fixes on google so thought I'd ask here before it goes to the tech.

Thanks, Sue.
 
Does the pad look good ? How long since last service?
Look to see if the impression in pad aligns proper with chimney.
If not you may have bent the key.
If yes, dose the leak go away with finger pressure on top of cup ?
Yes ? Fold a bit of paper and slide it under springfoot.
No ? You need a new pad. Wrap a layer or two of saran wrap over the face of the pad. Tie or tape to hold in place.

Temporary band aid for the day. Get it to a tech.
 
Does the pad look good ? How long since last service?
Pad is clean and in great condition. Complete overhaul last year.
Look to see if the impression in pad aligns proper with chimney.
It does indeed
If not you may have bent the key.
I think is likely, looking at it.
If yes, dose the leak go away with finger pressure on top of cup ?
Yes
Yes ? Fold a bit of paper and slide it under springfoot.
No ? You need a new pad. Wrap a layer or two of saran wrap over the face of the pad. Tie or tape to hold in place.

Temporary band aid for the day. Get it to a tech.
Will try the folded paper tomorrow.

Will need a visit to the tech soon. Luckily I play more alto.

Thanks for the reply 👍😃
 
In my humble opinion, bending a key is last resort. What could be done, is heating the key with a hair dryer to 'float' the pad in it's Shellac bed. If you get what I'm saying, you have a chance at succeeding there. If not, just take it to a tech.

There again, if you know what you're doing, a small needle can help you reset the pad but it works better if you have some shellac and some adjusting material to slide under the pad where needed. I use mosquito screen! It's actually very good because it lets the shellac through the holes.

That's my technique. It may not be approved by the experts... And they know better! 😜
 
@Colin the Bear I like this solution for now, thank you.

@saxyjt thanks for the suggestions. It's definitely not the pad, it looks like the key has taken a slight knock so needs nudging back into place. Beyond my capabilities as I'm likely to pull it clean off if I try any manipulation so a visit to the tech is needed.
 
No rubber bands but found a use for my poppy band. It will do as a fix until I get to the tech in May. Seems to blow ok for now. Cheers @Colin the Bear

IMG_3963.jpg
 
Yes I agree, the band didn't work out. I hadn't thought it through that it would restrict the F key. I'm not technical at all! My husband came in and said straight away in his broad northern accent (think Sean Bean) "That'll never bloody work lass" He had a look and seems to have sorted it. I should have asked him in the first place. Lesson learnt.
 
Yes I agree, the band didn't work out. I hadn't thought it through that it would restrict the F key. I'm not technical at all! My husband came in and said straight away in his broad northern accent (think Sean Bean) "That'll never bloody work lass" He had a look and seems to have sorted it. I should have asked him in the first place. Lesson learnt.
Wasn't it being of some use why you married him?
Out of curiosity was the '(think Sean Bean)' an aside to yourself?
 
Wasn't it being of some use why you married him?
Out of curiosity was the '(think Sean Bean)' an aside to yourself?
You are hilarious. It wasn't but now you mention it.....think I'll watch an episode of Sharp sometime soon.
 
Oh I haven't seen that - might just put it on my ever growing list of **** to watch that I never get around to.
 

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,069
Messages
578,516
Members
8,131
Latest member
Jef B
Back
Top Bottom