Mouthpieces Is a large chamber mouthpiece less suited to play ppp?

How do you define "a large chamber mouthpiece"? A big and round chamber is often recommended to be universal solution for many saxplayers.

With my Dukoff LD (silverite) mpc the p or pp playing ( I never reached the ppp level, Rock & roll Saxophone you know) was easier compared to the D chamber mouthpiece.

I think p, pp, ppp or f, ff, fff .... is done by the player. The reed, mouthpiece and sax is just helping up. You can probably play ppp on a high baffle and small chamber mouthpiece as well. It's often a matter of how much time you are willing to spend to sound ppp. To think ppp and be ppp is also helping up. The design of the chamber can be a placebo effect as well.
I absolutely loved my Dukoff LD 9 that I played back in the 80s. Huge chamber and low baffle, but still somehow lush and focused. Massive sound. No problems playing ppp to fff. Alas, it only survived about 5 years. I had a half dozen Dukoffs from that era (tenor and alto) which are all long gone. I wish Dukoff would use good materials instead of that ugly, soft "silverite", but I digress. I have tried a few contemporary Dukoffs, but they were all pretty terrible.
 
Just an update on the situation:

I had my tech working on the Conn, and he did a great job, got rid of all the leaks and regulated and oiled everything that needed to be regulated or oiled.
Now I can't blame the horn for things that don't work the way they should ;-)

And surely, some pieces that I had to play were still challenging to play (or, to play right), more challenging than on my Yamaha sometimes.
So, I still need some time to adjust to the quirks and particulars of that Conn. But I am sure that in a couple of months that it will work a lot better.
 
Did you look at the octave mechanism to see if you incrementally bend it during assembly? On some horns it is particularly susceptible.

If you are still switching back and forth between the Yamaha and Conn, it will take you much longer to get used to the Conn. I suggest you commit to it - at least for a while - until you get it sorted. If you’d rather toy with swapping horns for its own entertainment value, then ignore this suggestion with impunity.
 
Did you look at the octave mechanism to see if you incrementally bend it during assembly? On some horns it is particularly susceptible.

If you are still switching back and forth between the Yamaha and Conn, it will take you much longer to get used to the Conn. I suggest you commit to it - at least for a while - until you get it sorted. If you’d rather toy with swapping horns for its own entertainment value, then ignore this suggestion with impunity.
The octave mechanism on the neck is quite sturdy. I had to use quite a bit of force to bend it into shape once we discovered that there was a leak. It's an underslung octave mechanism like this
And I always pay attention when putting on the neck, never use force to do it. I have been playing for about 20 years without encountering this problem. So I guess I'm safe there.

And about "switching back and forth between the Yamaha and Conn", that was never the case.
I was committing to the Conn, the Yamaha was in the (virtual) mothballs. It is now my backup horn for those moments when the Conn is not available (should be about a week every year during the yearly maintenance). And I still have the possibility of playing my baritone at those moments.
 

Similar threads... or are they? Maybe not but they could be worth reading anyway 😀

Social

New! Social Feeds

Look out for the navigation icon:

Follow CafeSaxophone

Latest Song of the Month

Trending

Forum statistics

Topics
32,072
Messages
578,575
Members
8,133
Latest member
walthang
Back
Top Bottom